|
Admission Process (for the academic 2025-26) of the PhD Programmes :
a) Candidates will be selected based on their performance in Tezpur University Entrance Examination
(TUEE) 2025 followed by Personal Interview (PI).
i) Candidates with UGC NET-JRF/ UGC CSIR NET-JRF, UGC CSIR NET (LS)/ SLET (LS), GATE, CEED or similar examinations as specified by the University are exempted from appearing Tezpur University Entrance Examination (TUEE)-2024 but they must appear for the PI conducted by the concern department.
Candidate should apply at https://www.tezu.ernet.in/academic/admission2025/
ii) Candidates those who have not qualified the above mentioned examinations must appear for the
examination conducted by Tezpur University. For appearing in TUEE-2025 candidate must apply
at https://www.tezu.ernet.in/academic/admission2025/
Eligibility criteria for MTech programmes :
PhD in Applied Physics: MSc/Integrated MSc in Physics/ Astrophysics/
Electronics/ Geophysics/ Material Science/ Applied Mathematics/ Nanoscience and Technology/
Biotechnology/Environmental Science andChemical Science. Or MPhil., MTech in Solid State Material/
Material Science/ Electronics/ Energy/ Nanoscience and Technology/ Biotechnology/ Environmental
Science andChemical Sciences. Or MS Astronomy and Astrophysics. Or BTech in Engineering Physics
with 80% marks in aggregate or equivalent CGPA
Research Areas :
i) Theoretical Modeling of Astrophysical Flows Around Compact Object
ii) 2D Layered Materials forApplications
PhD in Civil Engineering : (a) ME/MTech/ MSc(Engg) in Civil
Engineering Or allied areas or (b) MSc in relevant discipline with minimum 70%marksinaggregate or
equivalent CGPA or (c) BE / BTech with 75% marks in aggregate or equivalent CGPA with a valid GATE Score.
Minimum two recommendation Letters from the Institute/University from where BE/BTech degree wasobtained.
Research Areas :
i) Geotechnical Engineering
ii) Environmental Engineering
iii) Transportation Engineering
PhD in Computer Science & Engineering: MTech in Computer Science/
IT/ Electronics, MCA, MSc in Computer Science, IT or BE /BTech with 75% marks in aggregate or equivalent CGPA with a
valid GATE Score. Minimum two recommendation Letters from the Institute/ University from where BE/BTech degree was
obtained.
Research Areas :
i) Data mining, Image processing
ii) Computer Vision and Geometry
iii) Bio-informatics
iv) SDN, NFV, IoT
v) Speech Processing
vi) NLP/ Pattern Recognition
vii) NLP/ Pattern Recognition
viii) ML, V2X, Tactile Internet
ix) ML, Trust and Reputation, EDM
x) Data Mining
xi) Network security, Bioinformatics,
xii) CRN, 5g/6G,
xiii)Optical Network, SDN
xiv)Wireless Network
PhD in Design : Master’s Degree in Design or ME/MTech/MArch/MCA/MSc
(Computer Sciences/Electronics) or Master’s degree in Applied Arts/ Ergonomics/ Fine Arts/ Visual Arts/ Psychology/
Physiology/ Occupational Safety and Health/ Journalism/ Mass Media Communication, or two-year Master’s degree in
Management (MBA or equivalent) with relevant studies in Design field with minimum 55% marks OR Bachelor’s Degree in
Design / Engineering / Architecture / Planning / Interior Design (10+2+4) years / 4 Years BFA/ Recognized degree in
Design related field (10+2+4) years (AICTE/UGC approved) with 75% marks in aggregate or 62 equivalent CGPA with valid
CEED/GATE Scores. OR Four-year Undergraduate Diploma in Design (NID or equivalent), with postgraduate qualification in
relevant area with at least 6.0 CGPA (or 55% marks)/ A two-year PostGraduate Diploma in Design in relevant areas
(NID/CEPT or equivalent) with first class at Bachelor’s level/ GD Art (5-year programme after 10th standard) with
one-year professional experience, with at least 6 CGPA (or 55% marks). Valid CEED/GATE Scores will be preferred.
Research Areas :
i) Rural Technology and Innovation.
ii) Product Design and Design Methodology
PhD in Electrical Engineering : ME/MTech in any relevant discipline
in Engineering or MBBS with MD/MS or MSc in any relevant science discipline, OR BE/BTech with 75% marks in aggregate or
equivalent CGPA with a valid GATE Score. Minimum two recommendation Letters from the Institute / University from where
BE/BTech degree was obtained
Research Areas :
i) Sensor Fabrication for Application in Food Industry,IOT & Health Monitoring, Green Energy, Sensor
ii) Control System, Smart Energy System, Chaos, IOT, Wastewater Purification
iii) Renewable Energy, PowerSystem, Electronic Drives, Electric Vehicles
iv) Power Electronics & Drives, Micro Grid, Smart Grid.
PhD in Electronics & Communication Engineering : ME / MTech /
MSc Engg / MS in Electronics/ Communication/ Electronics Design/ Electrical/ Instrumentation/
Control/ Microwave/ Biomedical/ Bioelectronics/ Bio-Technology/ Computer Science/ Information
Technology. or MSc in Electronics/ Physics/ Applied Mathematics. MCA with Physics, Chemistry and
Mathematics in Bachelor degree,MBBS with MD/ MS degree. OR BE / BTech with 75% marks in aggregate
or equivalent CGPA with a valid GATE Score. Minimum two recommendation Letters from the Institute/
University from where BE/ BTech degree was obtained.
Research Areas :
i) Robotics, Biomedical Signal Processing
ii) Image Processing, Computer Vision, Deep Learning- based Signal and Image Analysis, Biomedical Signal Processing
iii) Bio-electronics, Bio-electronic Devices
iv) SemiconductorDevices Flexible Electronics/Neuro-engineering
v) Semiconductor Devices, Simulation and Modeling
vi) Bio-sensors, Quantum Technology/Machine Learning for Smart Sensing, Sensors • Sensor and Nanotechnol
vii) Sensor and Nanotechnology
viii) Vehicular Electronics.
PhD in Energy : MSc / ME / MTech degree in Energy Technology/ Energy Management /Energy related
Engineering and Technology/ Physics/ Chemistry/Agriculture Allied subjects.
Research Areas :
i) Energy Management, Bio-energy, IoT for Biogas
ii) Bio- fuels, Catalytic transformation of Biofuels, Energy-Environment/ Building Energy, Biomass Energy
iii) Hybrid Energy System, Grid Integration, Instrumentation and Control
iv) Waste Management
v) Fuel Cell, GreenHydrogen, Battery Supercapacitor, Hybrid UAV based Air Quality Monitor
vi) Solar Energy, Photovoltaic, EnergySystems, Solar Hybrid Systems
vii) Heating & Ventilation,Radiant System, GroundSourceHeat
PhD in Food Engineering & Technology : MTech/ ME/ Integrated MTech in Food Engineering and Technology/ Food and Dairy
related other programme/ Mechanical Engineering/ Chemical Engineering/ Bioprocess/ Bio-chemical/ Biotechnology Or MSc/ Integrated MSc in Food
Engineering and Technology/ Food and Dairy related other programme/ Applied Microbiology/ Microbiology/ Bio-Chemistry/ Chemistry/
Biotechnology/ Biosciences and Informatics, Or B.E./ B.Tech. (in Food Engineering and Technology/ Food and Dairy related other
programme) with 75% marks in aggregate or equivalent CGPA with valid GATE Score. Minimum two recommendation Letters from the Institute/ University from
where B.E./ B.Tech degree was obtained.
Research Areas :
i) Functional Foods and Food Chemistry
ii) Food Packaging, Food Processing Waste Utilization
iii) Food Process Engineering
PhD in Mechanical Engineering: ME / MTech / MSc (Engg) in Mechanical Engineering or any other relevant Engineering
branches including Chemical Engineering and Materials Science Engineering Or MSc Degree in any relevant discipline with CSIR-UGC JRF/NET
Qualified certificate or a valid GATE score. Candidates other than those with MSc Mathematics must have studied Mathematics up toBSc level.
Or, BE / BTech degree with 75% marks in aggregateor equivalent CGPA with valid GATE Score. Minimum two recommendation Letters from the Institute
/University from where BE/BTech degree was obtained
Research Areas :
i) Design and Analysis of Heat Exchangers, Thermodynamic modelling and optimization of (i) Solar thermal power and cooling systems (ii) Gas
turbine based combined power systems with Steam Rankine, Organic Rankine and Kalina as bottoming cycles (iii) Vapour absorption cooling systems
ii) Optimum design of structures and systems using evolutionary algorithms with special emphasis to multi-objective combinatorial optimization problems
iii) Solar Thermal Energy Applications, Drying Technology Including Solar Hybrid Drying, Thermal Energy Storage
iv) Solar Thermal Energy Storage, Material Characterization
v) Thermal Engineering, Heat Transfer System
vi) Rehabilitation Robotics - Prosthetic Hand, Single Objective and Multiobjective Optimization Facility Layout 65 Problem, Mechatronics
vii) Stress Analysis, Plasticity, Autofrettage, Fracture Mechanics.
PhD in Applied Mathematics : MSc/MA/ME/MTech/MS/BS - MS/ Integrated MSc Degree in Mathematics/
Statistics/Engineering Mathematics / Mathematics and Computing/ Applied Mathematics/ Operations Research/ Mechanical Engg./
Industrial Engineering/Computer Science and Engineering/ Information Technology/any allied subject with 55% marks in aggregate or equivalentCGPA.
Or B.Tech. in Mathematics and Computing/any allied subjects with 75% marks in aggregate or equivalent CGPA with a valid GATE Score. Minimum two
recommendation Letters from the Institute/ University from where BE/BTech degree was obtained
Research Areas :
i) Differential Equations, Harmonic Analysis
ii) Spectral Graph Theory
iii) Operations Research, Inventory Modelling, Fuzzy Mathematics and Optimization, Mathematics Modelling.
b) PhD Programmes by Industry Personnels and Professionals:
Industry professionals refer to persons employed in a formal organization dealing with goods and services, manufacturing, and allied areas. Practicing professionals include persons working in self-employed professions or entrepreneurs like chartered accountant, cost accountant, company secretary, medical professionals including physicians and any other relevant professions. The candidates eligible to apply needs to possess the minimum experience/credential, as given below.
|
