Publications

Books

• D. Datta, LaTeX in 24 Hours: A Practical Guide for Scientific Writing, 2017, Springer International Publishing.

In Journals

• P. Sarma, T. K. Gogoi, Performance comparison of SOFC integrated combined power systems with three different bottoming steam turbine cycles, , Energy Conversion and Management , 132, 91–101, 2017.

• J. Kakati, T.K. Gogoi and K. Pakshirajan, Production of biodiesel from Amari (Amoora Wallichii King) tree seeds using optimum process parameters and its characterization, Energy Conversion and Management , 135, 281–290, 2017.

• P. Sarmah , T.K. Gogoi and R. Das, Estimation of operating parameters of a SOFC integrated combined power cycle using differential evolution based inverse method, Applied Thermal Engineering , 119, 98–107, 2017.

• R. Das, K. Singh and T.K. Gogoi, Estimation of critical dimensions for a trapezoidal-shaped steel fin using hybrid differential evolution algorithm , Neural Computing and Applications, 28 (7) , 1683-1693 , 2017.

• Kashyap, S., Datta, D., Lime sludge waste – HDPE composites – a study of their mechanical, thermal and morphological properties, Journal of Thermoplastic Composite Materials, Accepted, , 2017.

• Kashyap, S., Datta, D., Evaluation of Stearic Acid modified Industrial Lime Sludge Waste as filler in High Density Polyethylene composites, Journal of Polymer Engineering, 38(4), 333-342, 2017.

• S. M. Kamal, U. S. Dixit, A. Roy, Q. Liu, V. V. Silberschmidt, Comparison of plane-stress, generalized-plane-strain and 3D FEM elastic-plastic analyses of thick-walled cylinders subjected to radial thermal gradient, International Journal of Mechanical Sciences, 131-132, , 744−752, 2017.

• Kalita, Z., Datta, D., Palubeckis, G. , Bi-objective corridor allocation problem using a permutation-based genetic algorithm hybridized with a local search technique  , Soft Computing (Springer) , , doi: https://doi.org/10.1007/s00500-017-2807-0, 2017 .

• Deka, A., Datta, D. , Geometric size optimization of annular step fin using multi-objective genetic algorithm  , Journal of Thermal Science and Engineering Applications (ASME), 9(2), 021013 (9 pages), 2017 .

• Deka, A., Datta, D. , B-spline curve based optimum profile of annular fins using multi-objective genetic algorithm  , Journal of Thermal Stresses (Taylor & Francis), 40(6), 733-746, 2017 .

• Steiner Neto, P.J., Datta, D., Arns Steiner, M.T., Detro, S.P., Scarpin, C.T. , A multi-objective genetic algorithm based approach for location of grain silos in Paraná State of Brazil  , Computers and Industrial Engineering (Elsevier), 111, 381-390, 2017 .

• Kalita, Z., Datta, D., Palubeckis, G. , Bi-objective corridor allocation problem using a permutation-based genetic algorithm hybridized with a local search technique  , Soft Computing (Springer) , Article in Press, doi: https://doi.org/10.1007/s00500-017-2807-0, 2017 .

• Deka, D., Datta, D. , Multi-objective optimization of the scheduling of a heat exchanger network under milk fouling  , Knowledge-Based Systems (Elsevier) , 121, 71-82, 2017 .

• Dutta, P.P. , Kumar, A., Development and performance study of solar air heater for solar drying applications, Solar Drying Technology, , 579--601 , 2017.

• Kashyap, S., Datta, D. , Reusing industrial lime sludge waste as a filler in polymeric composites  , Materials Today: Proceedings (Elsevier) , 4(2) Part A, 2946-2955, 2017 .

• Gohain B. N., Kirtania S., Evaluation of axial Young’s modulus of CNT-based composites using square, hexagonal and cylindrical representative volume elements., ADBU Journal of Engineering and Technology,, 6(1), 00610601(6PP), 2017.

• Haloi, P., Talukdar, J., Rathod, M.D., Raj, M., Second law analysis of a closed MHD-Steam turbine combined cycle with preheat, International journal of engineering technology ,science and research, , 2394-3386, 2017.

• B. Chowdhury , S. K. Deb, Cause-Effect Diagram Versus System Dynamic Model- A case study of Manufacturing Defects Analysis, International Journal of Engineering Technology Science and Research. , 4 (1), 166-170, 2017.

• M. Bardalai, N.K. Bordoloi, D.K. Mahanta, Production and biodegradability analysis of bael shell pyrolysis oil, Materials Today: Proceedings, 4, 603-610, 2017.

• Kashyap, S., Datta, D., Reusing industrial lime sludge waste as a filler in polymeric composites, Materials today: Proceedings, 4(2), 2946-2955, 2017.

Book Chapters

• Dutta, P. P. and Kumar, A., Development and performance study of solar air heater for solar drying application, In: Solar Drying Technology, Concept, Design, Modelling, Economics and Environment, 579-601, 2017, Springer.

In Conference

• Kakati J. , Gogoi T.K. , Combustion analysis of a diesel engine fuelled with 10% and 20% blending of Terminalia seed oil based biodiesel with conventional diesel, 1st International and the 18th ISME Conference on Enabling Sustainable Development in Mechanical Engineering, ISME-TE-164, 2017, NIT Warangal.

• Boruah M.P. , Gogoi T.K. , Thermal performance of tapered microchannel heat sink using Al2O3/water nanofluid, A National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB 2017), 177-183, 2017, Tezpur University.

• Talukdar K., Gogoi T.K., Performance of a combined power and cooling system with vapour compression and absorption refrigeration system as bottoming cycle: a comparative study, SUSTAINABLE MECHANICAL ENGINEERING, TODAY AND BEYOND held during 25-26th March, 2017, 269-276, 2017, Tezpur University.

• Konwar D. , Gogoi T.K., Exergy based parametric analysis of a water-LiCl vapour absorption refrigeration system, A National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB 2017), 251-256, 2017, Tezpur University.

• A. Bora, M. Saikia, S. Anand, Gogoi T.K, Exergy analysis of a reheat regeneration vapour power cycle with a number of feed water heaters, A National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB 2017), 263-268, 2017, Tezpur University.

• Kakati J., Gogoi T.K, Characterization of biodiesels and performance analysis of a diesel engine run on biodiesel blends, Sustainable Mechanical Engineering and Beyond (SMETB-17), 285-290, 2017, Tezpur University.

• Jahidul Islam, Satadru Kashyap, Study on the tensile properties of Lime Sludge Filled Coir Fibre Reinforced Epoxy Composites, A National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB 2017), , 2017, Tezpur University, Assam.

• Sanjib Banerjee, Sanjib Gogoi, Determining Peak-Aging Time during Precipitation Hardening of Aluminium Alloys, A National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB 2017), 123-126, 2017, Tezpur University, India.

• Sanjib Banerjee, Nabanita Das, Dry Sliding Wear Behaviour of Microalloyed Al-Cu Alloys, A National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB 2017), 145-148, 2017, Tezpur University, India.

• Sanjib Banerjee, Indrani Mazumder, Investigating Cutting Force during Facing of Microalloyed Al-Cu Alloys, A National Conference on Sustainable Mechanical Engineering: Today and Beyond (SMETB 2017), 163-166, 2017, Tezpur University, India.