Publications in 2015

 

 

Publications in Journals

Bardalai, M. and Mahanta, D. K. A Review of Physical Properties of Biomass Pyrolysis Oil, International Journal of Renewable Energy Research, 5(1), 2015.

Devi, M., Dutta, P. P. 1 and Mahanta, D. Analytical calculation of chain length of ferro fluid, Bulletin of Material Science Research, 38(1), 2015.

Gogoi, T. K., Pandey, M. and Das, R. Estimation of operating parameters of a reheat regenerative power cycle using simplex search and differential evolution based inverse methods, Energy Conversion and Management, 91, 2015.

Pathak, H., Das, S., Doley, R., and Kashyap, S. Optimization of Cutting Parameters for AISI H13 Tool steel by Taguchi method and Artificial Neural Network, International Journal of Materials Forming and Machining Process 2: (2), 2015.

Paul, A., Narasimhan, A., and Das, S. K. Investigation of thermal damage of tissue mimics embedded with large blood vessels during PPTT, International Journal of Numerical Methods for Heat and Fluid Flow (In press).

Steiner, M. T. A., Datta, D., Neto, P. J. S., Scarpin, C. T. and Figueeira, J R. Multi-objective optimization in partitioning the healthcare system of Parana State in Brazil, Science Omega - The International Journal of Management, 52, 2015.

Kirtania S and Chakraborty D (2015). Failure analysis of carbon nanotube/epoxy composites having a broken carbon nanotube. Journal of Reinforced Plastics and Composites, DOI: 10.1177/0731684415595127

S. Borah, B. Chowdhury, S. Gogoi, Z. Askary (2015). A Theoretical Study of Design Parameters of an Archimedean Screw Turbine, Journal of Material Science and Mechanical Engineering (JMSME) p-ISSN: 2393-9095; e-ISSN: 2393-9109

P. Kalita, A. K. Dass, A. Sarma. Effects of numerical diffusion on the computation of viscous supersonic flow over a flat plate, International Journal of Applied and Computational Mathematics, Springer, 2015, DOI 10.1007/s40819-015-0094-y

T.K. Gogoi, D. Konwar, Exergy analysis of a H2O-LiCl absorption refrigeration system with operating temperatures estimated though inverse analysis, Energy Conversion and Management, 110 (2016) 436-447 DOI:10.1016/j.enconman.2015.12.037

K. Talukdar, T.K. Gogoi, Exergy analysis of a combined vapor power cycle and boiler flue gas driven double effect water-LiBr absorption refrigeration system, Energy Conversion and Management 108 (2016), 468-477 DOI: 10.1016/j.enconman.2015.11.020

T.K.Gogoi, Estimation of Operating Parameters of a Water-LiBr Vapor Absorption Refrigeration System Through Inverse Analysis, ASME J. of Energy Resources Technology, 138 (2) (2016), 022002 Paper No: JERT-14-1402. DOI: 10.1115/1.4031833

S. Kashyap and D. Datta (2015). Process parameter optimization of plastic injection molding: a review. International Journal of Plastics Technology, 19(1):1-18, doi: http://dx.doi.org/10.1007/s12588-015-9115-2.

   
   

 

Publications in Conferences

   
 

Shukla SS, Kumar B, Kumar A and Kirtania S (2015). Modeling and analysis of an in-house built tadpole type base structure of a human powered vehicle using finite element method. In the proceedings of Advances in Civil and Infrastructure Engineering (ACIE-2015), pp.72-77, May 8-9, 2015, Tezpur University, Assam, India.  

 Barua E, Kirtania S and Das A (2015). Determination of elastic moduli of single layered Graphene sheets using finite element method. In the proceedings of Advances in Civil and Infrastructure Engineering (ACIE-2015), pp.78-83, May 8-9, 2015, Tezpur University, Assam, India.  

Bardalai, M., Shukla, S., Shukla, A. K., Saraj, R., Tripathy, G. and Kumar, S. Thermodynamic Performance Analysis Active and Passive Solar heater. International Conference on Frontiers in Mathematics, Gauhati University, Guwahati, Assam, 2015. (Abstract).

Dutta, P. P.1 and Baruah, N. Food drying opportunity from waste heat recovery National Seminar cum workshop IPFP: IBES, 2015, Tezpur University, Tezpur, 2015.

Dutta, P. P.1 and Baruah, N. Fluid flow studies of a compact rotary flue gas air preheater. In Proceedings of ICFM2015 International Conference on Frontiers in Mathematics 2015, Guwahati, Assam, India, 2015.

Kalita, P. and Dass, A. K. Effect of limiter on the computation of viscous supersonic flow over a flat plate. International Conference on Frontiers in Mathematics, 2015, Gauhati University (Abstract)

P. Sarmah and T.K. Gogoi, Exergy analysis of a solid oxide fuel cell (sofc) integrated combined power cycle, in the Proceedings of the 17th ISME Conference on Advances in Mechanical Engineering held during October 3-4, 2015 at IIT Delhi, New Delhi.

U. Gautam, S. Das, S. Das and T.K. Gogoi, A parametric study on the effect of varying open water heater pressure on thermodynamic performance of a combined cycle power plant, in the Proceedings of the 17th ISME Conference on Advances in Mechanical Engineering held during October 3-4, 2015 at IIT Delhi, New Delhi.

S. Borah, B. Chowdhury, S. Gogoi, Z. Askary, A Theoretical Study of Design Parameters of an Archimedean Screw Turbine, National Conference On Recent Trends in Mechanical, Electrical, Electronics, Civil, Computer Science and Information Technology (MECIT-2015) held at Jawaharlal Nehru University, New Delhi, on 21-22 November, 2015.

S. Biswas and B.Chowdhury, Industrial Applications and Practices of Six Sigma : A Literature Review, in the proceedings of 3rd International Conference on Industrial Engineering (ICIE-2015) & 57th National Convention of Indian Institution of Industrial Engineering at Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat, November 26 - 28, 2015, ISBN: 978-93-84935-56-6.

S. Kirtania and D. Chakraborty , Investigation of stress distribution and strain energy release rate in carbon nanotube/aluminum composites having a broken carbon nanotube, in the 4th Int. Conf. on Advanced Nanomaterials and Nanotechnology (ICANN-2015), December 08-11, 2015, IIT Guwahati, Assam, India.

K. Trinavee, T.K. Gogoi, M. Pandey, Flow and Heat transfer analysis in a circular microchannel with alumina based nanofluid, in the book of abstracts of XXVII IUPAP Conference on Computational physics, December 2-5, 2015 at IIT Guwahati IIT Guwahati, Assam, India.

Kirtania S and Chakraborty D (2015). Investigation of stress distribution and strain energy release rate in carbon nanotube/aluminum composites having a broken carbon nanotube. 4th Int. Conf. on Advanced Nanomaterials and Nanotechnology (ICANN-2015); IIT Guwahati, Assam, India