Publications in Journals

Dutta, P. P.¹ and Baruah D. C. Gasification of up rooted Tea Shrubs for Process Heat generation in Tea Manufacturing, Biomass and Bioenergy, 66, 2014.

Dutta, P. P.¹ and Baruah, D. C. Modelling and Experimental Studies of Black Tea Using Producer Gas as Fuel, Applied Thermal Engineering, 63, 2014.

Dutta, P. P.¹ and Baruah, D. C. Possibility of Biomass gasification in Tea Manufacturing Industries International, Journal of Renewable Energy Technology, 5(4), 2014.

Dutta, P. P.¹, Das, A., Pandey, V. and Devi, M. Fuel characteristics of some locally available biomass as a potential gasification feed stock for thermal application,Industrial and Engineering Chemistry Research Journal,53 (51), 2014.

Dutta, P. P.¹, Pandey, V., Das, A. R., Sen, S. and Baruah, D. C. Downdraft Gasification Modeling and Experimentation of Indigenous Biomass for Thermal Application, Energy Procedia, 54, 2014.

Gogoi, T. K. A Combined Cycle Plant with air and fuel recuperator for Captive power application, Part 1: Performance analysis and comparison with non-recuperated and gas turbine cycle with air recuperator, Energy Conversion and Management; 79, 2014.

Gogoi, T. K. and Das, R. A Combined Cycle Plant with air and fuel recuperator for Captive power application, Part 2: Inverse analysis and parameter estimation, Energy Conversion and Management, 79, 2014.

Gogoi, T. K., Sarmah, P., Deb Nath, D. Energy and exergy based performance analyses of a solid oxide fuel cell integrated combined cycle power plant, Energy Conversion and Management, 86, 2014.

Gogoi, T. K. and Talukdar, K. Thermodynamic analysis of a combined reheat regenerative thermal power plant and water- LiBr vapour absorption refrigeration system, Energy Conversion and Management, 78, 2014.

Gogoi, T. K. and Talukdar, K. Exergy based parametric analysis of a combined reheat regenerative thermal power plant and water-LiBr vapor absorption refrigeration system, Energy Conversion and Management, 83 (2014) 119-132. doi:10.1016/j.enconman.2014.03.060, 2014.

Haloi, P. Comparison of Locally Available Biomass Characteristics as a Gasification Feedstock, International Journal of Current Engineering and Technology, 4(4), 2014.

Kalita, Z. and Datta, D. Solving the bi-objective corridor allocation problem using a permutation-based genetic algorithm, Computers & Operations Research, 52(Part-A), 2014.

Nath, P. K. and Datta, D. Multi-objective hardware-software partitioning of embedded systems: a case study of JPEG encoder, Applied Soft Computing, 15, 2014.

Paul, A., Narasimhan, A., Kahlen, F. J., and Das, S. K. Temperature evolution in tissues embedded with large blood vessels during photo-thermal heating, Journal of Thermal Biology, 41, 2014.

Paul, A., Bhandaru, N. K., Narasimhan, A., and Das, S. K. Subsurface tumor ablation with near infra-red radiation using intratumoral and intravenous injection of nanoparticles, International Journal of Micro-Nano Scale Transport, 5(2), 2014.

Sanjib Banerjee, Angshuman Deka, Gitartha Dev Sarmah and Nitish Bhardwaj,Artificial Neural Network Modeling of the Effect of Cutting Conditions on Cutting Force Components during Orthogonal Turning, International Journal of Current Engineering and Technology, Sp. Issue -2 (Feb. 2014) 127

Chowdhury, B., Deb, S. K. and Das, P. C. Computer Aided Measurement System Analysis of Attribute Data: A Case of Liner Manufacturing, International Journal of Precision Technology, 4(1), 2014.

Chowdhury, B., Deb, S. K. and Das, P. C. Managing And Analyzing Manufacturing Defects–A Case of Refrigerator Liner Manufacturing, International Journal of Current Engineering and Technology, Special issue – 2. 2014.

S. Kirtania and D. Chakraborty (2014). Analysis of carbon nanotube-reinforced alumina matrix nanocomposites with a broken fiber. Journal of Reinforced Plastics and Composites, Vol.33, No.4, pp.389-398, 2014.

S. Kirtania and D. Chakraborty (2014). Fracture behavior of carbon nanotube-based composites with a broken fiber using multi-scale finite element modeling. Journal of Computational and Theoretical Nanoscience, Vol.11, No.3, pp.676-684, 2014.

 Publications in Conferences

Banerjee, S., Bayan, G., Roy, A., Sarkar, S. and Gogoi, D. Influence of Rolling and Age-Hardening on the Hardness and Impact Properties of Microalloyed 2219 Al Alloys. In Proceedings of 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), IIT Guwahati, 2014.

Bardalai, M. and Mahanta, D. K. The pyrolysis oil production from bael (aeglemarmelos) shell dust using a fixed bed reactor. In Proceedings of International Symposium on Aspects of Mechanical Engineering & Technology for Industry, NERIST, Arunachal Pradesh, 2014.

Baruah, S., Karmakar, N., Das, S. and Kalita, P. Effect of numerical diffusion for computation of strong and weak shocks. In Proceedings of International Symposium on Aspects of Mechanical Engineering & Technology for Industry, NERIST, Arunachal Pradesh, India, NERIRST, Arunachal Pradesh, 2014.

Chowdhury, B. and Deb, S.K. Comparative Analysis of Manufacturing System Using Cause – Effect Diagram and System Dynamics Model. In Proceedings of 5^th International & 26^th All India Manufacturing Technology, Design and Research (AIMTDR), IIT, Guwahati, 2014.

Chowdhury, B., Deb, S.K. and Das, P.C. System Dynamics Model in the Analysis of Manufacturing Defects and Process Improvements. In Proceedings of 5^th International & 26^th All India Manufacturing Technology, Design and Research (AIMTDR), IIT, Guwahati, 2014.

Dutta, P. P.¹, Das, D., Dutta, M., Sukla, G . Studies on green design and manufacture of hybrid vehicle.  In proceedings 5^th International and 26^th All India Manufacturing Technology Design and Research, IITG, Guwahati, 2014.

Dutta, P. P.¹, Dutta, M., Das, D., Shukla, A. K., Konwar, A., Kumar, V., Sharma, S., Bora, C. K. Design, FEA Analysis and Fabrication of a Hubrid All Terrian Trike. In        Proceedings of International Symposium on Aspects of Mechanical Engineering & Technology for Industry, NERIST, Arunachal Pradesh, 2014.

Dutta, P. P.¹, Keot, A., Gogoi, A., Bhattachajee, A. Fluid Flow and Thermal Performance Study of a Pin Fin Solar Air Heater. In Proceedings of the 5^th International and 41^st  National Conference on Fluid Mechanics and Fluid Power, IIT Kanpur, 2014.

Dutta, P. P.¹, Kumar, B., Singh, D., Mishra, A, Baruah, N. Design of compact heat exchanger. In Proceedings of International Symposium on Aspects of Mechanical Engineering & Technology for Industry, NERIST, Arunachal Pradesh, 2014.

Dutta, P. P.¹, Sarmah S., Mahanta, A., Choudhury, A., Gupta S., Gogoi, R., Baruah, D. Development of an efficient hybrid tricycle. In the proceedings International and 26^th All India Manufacturing Technology Design and Research, IITG, Guwahati, 2014.

Dutta, P. P.², Borah, D. and Ali, B. Optimal design of a multi-stage impact crusher. In Proceedings of International Symposium on Aspects of Mechanical Engineering & Technology for Industry, NERIST, Arunachal Pradesh, 2014.

Gogoi, T. K. and Pandey, M, Performance analysis of a reheat regenerative thermal     power plant with solid biomass fuels and coal of various compositions. In            Proceedings of International. conference on advanced materials and Energy technology (ICAMET) IIEST Shibpur, Kolkata, 2014.

Gogoi, T. K. and Sarmah, P. Exergy analysis of a hybrid solid oxide fuel cell –gas turbine configuration . In Proceedings of International Conference on Environment and Energy (ICEE) IJNTUH, Kukatpally, Hyderabad, 2014.

Haloi, P., Basumatari, B. and Choudhury, D. Study of the Influence of Angular Elevation and Flue Gas of Biomass Feedstock on the Thermal Performance of a Thermosyphone Heat Exchanger. In Proceedings of International Symposium on Aspects of Mechanical Engineering & Technology for Industry, NERIST, Arunachal Pradesh, 2014.

 Hoque, S. Z. and Kalita, P. Numerical simulation of supersonic viscous flow over a flat plate. In Proceedings of International Symposium on Aspects of Mechanical Engineering & Technology for Industry, NERIST, Arunachal Pradesh, 2014.

Sarmah, P. and Gogoi, T. K. Parametric analysis of a hybrid solid oxide fuel cell –gas turbine plant. In Proceedings of International Symposium on Aspects of Mechanical Engineering & Technology for Industry, NERIST, Arunachal Pradesh, 2014. 

Hoque, S. Z. and Gogoi, T. K. Thermodynamic analysis of a cascaded vapour compression refrigeration sysyem through exergy.  2014, NERIST, Arunachal Pradesh, In Proceedings of International Symposium on Aspects of Mechanical Engineering & Technology for Industry, NERIST, Arunachal Pradesh, 2014.

Kalita, P. and Dass, A. K. Effect of numerical diffusion on the computation of hypersonic shock wave boundary layer interaction. In Proceedings of International Symposium on Aspects of Mechanical Engineering & Technology for Industry, NERIST, Arunachal Pradesh, 2014.

Kalita, P., Kumar, R. and Dass, A. K. Aspects of a diffusion-regulated scheme applied to hypersonic flow. In Proceedings of the 5^th International and 41^st National Conference on Fluid Mechanics and Fluid Power, In IIT, Kanpur, 2014.

Kalita, Z. A mocroparticle separation device using inertia combined dielectrophoresis technique for the separation of tumour cells from blood. In Proceedings of International Symposium on Aspects of Mechanical Engineering & Technology for Industry, NERIST, Arunachal Pradesh, 2014.

Paul, A., Bhandaru, N.K., Narasimhan, A. and Das, S.K. Tumor Ablation with Near-Infrared Radiation using Localized Injection of Nanoparticles. DOI: 10.1615/IHTC15.bma.009715, begell house, IHTC-15,
Kyoto, Japan, August 10-15, 2014.

Paul, A., Narasimhan, A. and Das, S.K. Study of thermal damage of tissues embedded with large blood vessels during photo-thermal heating. 3rd International Conference on Computational Methods for Thermal
Problems, (ISSN: 2305-5995); Lake Bled, Slovenia, June 2-4, 2014.