|
Publications
in 2010 |
|
Publications in
Journals |
|
1. |
T.K. Gogoi, D.C.Baruah (2010). A Cycle
Simulation Model for Predicting Performance of a Diesel Engine Fuelled by
Diesel and Bio-diesel Blends. Energy, 35 :1317–1323 |
|
2. |
M. Ajith,
R. Das, R. Uppaluri and S.C. Mishra.
Estimation of boundary surface heat fluxes in a square enclosure with an
embedded design element. Journal of Thermophysics
and Heat Transfer, 2010, doi: http://dx.doi.org/10.2514/1.49910. |
|
3. |
B.K. Debnath
and R. Das, Prediction of performance coefficients of a three bucket Savonius rotor using artificial neural network.
Journal of Renewable and Sustainable Energy, 02(4):043107, 2010, doi: http://dx.doi.org/10.1063/1.3467510. |
|
|
4. |
R. Das, S.C. Mishra,
T.B. Pavan Kumar and R. Uppaluri.
An inverse analysis for parameter estimation applied to a non-Fourier
conduction - radiation problem. Heat Transfer Engineering, 32(6):455-466, 2010. |
|
5. |
R. Das, S.C. Mishra, and R. Uppaluri. Inverse analysis applied to retrieval of parameters
and reconstruction of temperature field in a transient conduction-radiation
heat transfer problem involving mixed boundary conditions. International
Communications in Heat and Mass Transfer, 37(1):52-57, 2010. |
|
6. |
S. Banerjee,
P.S. Robi and A. Srinivasan.
Constitutive Modeling for High Temperature Flow Behavior of Al
6.2%Cu0.6%Mg Alloys with Trace Additions of Sn,
Metallurgical and Materials Transactions A , 2010. |
|
7. |
S. Banerjee,
P.S. Robi and A. Srinivasan.
Calorimetric Study of Precipitation Kinetics of Al-Cu-Mg and AlCuMg0.06 wt.% Sn Alloys. Metals and
Materials International, DOI. 10.1007/s12540-010-0802-4, 2010. |
|
8. |
S. Banerjee,
P.S. Robi, A. Srinivasan
and Praveen Lakavath. Effect of Trace Additions
of Sn on Microstructure and Mechanical Properties
of Al-Cu-Mg Alloys. Materials and Design, 31:4007-4015, 2010. |
|
9. |
S. Banerjee,
P.S. Robi, A. Srinivasan
and Praveen Lakavath. High Temperature
Deformation Behavior of Al-Cu-Mg Alloys Micro Alloyed with Sn. Material Science and Engineering A, 527:2498-2503, 2010. |
|
10. |
S K Singh and R. Tiwari. Identification of a Multi-Crack in a Shaft
System using Transverse Frequency Response Functions. Mechanism and
Machine Theory, 2010 |
|
11. |
M. Ghosh, B.K. Tiwary and
D. Datta
(2010). Maintaining optimal state probabilities in biological
systems. Systems and Synthetic Biology 4(2):117-124. |
|
Publications in
Conferences |
|
|
1.
S. K. Singh,
R. Tiwari and S. Talukdar,
A Novel Normalization
Procedure of Quadratic Coefficients in a Multi-Crack Identification Algorithm
for a Shaft System, Proceedings of IFToMM
8th International Conference on Rotordynamics,
September 12-15, 2010, KIST, Seoul, South Korea. 2.
D.
Datta and A.K. Das (2010). Tuning
process parameters of electrochemical machining using a multi-objective
genetic algorithm: A preliminary study. Simulated Evolution and
Learning (SEAL-2010), Kanpur (India); Lecture Notes in Computer Science
(LNCS), Springer; 6457/2010:485-493. 3.
D.
Datta, J.R. Figueira and J. Malczewisk (2010). Aggregating census units with a
multi-objective genetic algorithm: Preliminary results of a case study in Canada.
24-th European Conf. on Operational Research (EURO-XXIV), Lisbon (Portugal);
98 (Abstract). 4.
J.R.
Figueira and D. Datta (2010). Graph partitioning by a real-coded multi-objective
genetic algorithm. 24-th European Conf. on Operational Research
(EURO-XXIV), Lisbon (Portugal); 98 (Abstract). 5.
D.
Datta and J.R. Figueira (2010). A
real-integer-discrete-coded differential evolution algorithm: A preliminary
study. European Conference on Evolutionary Computation in
Combinatorial Optimisation (EvoCOP-2010), Istanbul (Turkey); Lecture Notes in
Computer Science (LNCS), Springer; 6022/2010:35-46. 6.
A.K. Das
and D. Datta (2010). Optimization
of process parameters of ultrasonic machining using a genetic algorithm.
All India Manufacturing Technology Design and Research (AIMTDR-2010). 7.
S. Kashyap,
H. Pirayesh, J.A. Nychka, D. Li and F. Yang (2010). Factors affecting the Dissolution of
resorbable Bioactive Glasses. TMS Annual Meeting &
Exhibition, Seattle, WA (USA); (Abstract) 8. Singh, R. Tiwari and S. Talukdar, Multi-crack Identification using Forced Responses from a Rotor System, Proc. of the Third International Conference on Vibration Engineering and Technology of Machinery, VETOMAC-VI, Dec. 13-15, 2010, IIT Delhi, India. 9.
Dutta P.P., Jain B.C., Das R., Mahapatra S. (2010). Modification and Performance Testing
of a Slow Speed Diesel Engine for Purely Producer Gas Operation.
National Conference on Renewable Energy Technology Issues and Prospects.
24-15/09/2010 at NERIST, AP. 10.
Sanjib Banerjee, P.S. Robi and A. Srinivasan, High Temperature Flow Behavior of Al–Cu–Mg Alloys
Microalloyed with Sn, 3rd International and 24th All India
Manufacturing Technology Design and Research Conference (AIMTDR), December
13-15 (2010) Visakhapatnam, India, (2) 983-988.
|
|
|
|
|
|