Publications (2023)

      Article

    1. Das M, Kirtania S, Kashyap S and Banerjee S., Evaluation of elastic properties of graphene reinforced aluminum matrix nanocomposites., International Journal of Materials Engineering Innovation, 2023.
    2. Bordoloi MM, Kirtania S, Banerjee S and Kashyap S., Analysis of stress through the thickness of hybrid laminated nanocomposites using finite element method, Journal of The Institution of Engineers (India), Series D[104(2), ], 51-59, 2023.
    3. J. Nondy, T.K. Gogoi, Proposal of a proton exchange membrane fuel cell-based hybrid system: Energy, exergy and economic analyses and tri-objective optimization,, Int’l Journal of Hydrogen Energy, 2023.
    4. Kundu, J., Koledov, V., Stephan, R.M., Deng, Z., Borah, M., Roy, B.K., von Gratowski, S., Pati, A. and Kashyap, S., Design, testing and implementation of a linear state variable feedback controller for providing tracking/regulation of a large platform of a Maglev vehicle, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 237(7), 1206-1218, 2023, 2023.
    5. Dutta, P. P., Borpatra Gohain, R., & Dutta, P. P., Performance assessment of an efficient omass fired cook stove as a standby unit for community cooking. , Biomass Conversion and Biorefinery, 13(13):11609-11620, 2023.
    6. Bareen, A., Dash, S., Kalita, P., and Dash, K. K. , Experimental investigation of an indirect solar dryer with PCM-integrated solar collector as a thermal energy storage medium. , Environmental Science and Pollution Research,, 2023.
    7. Dutta, P., Dutta, P. P., and Kalita, P., Thermal performance study of a PV-driven innovative solar dryer with and without sensible heat storage for drying of Garcinia Pedunculata. , Environmental Science and Pollution Research, 2023.
    8. Dutta, P., Dutta, P.P., Kalita, P., Energy and exergy study of a novel multi-mode solar dryer without and with sensible heat storage for Garcinia pedunculata., Energy Sources, Part A: Recovery, Utilization, and Environmental Effects,, 45:9266–9282., 2023.
    9. Kalita Z, Kashyap S, Borah R, Swargiary MC, Pao K., Design and Analysis of a Five Fingered Robotic Hand., NanoWorld Journal, , 9(S1): S476-80, 2023.
    10. Chetry, A., Kamal, S.M., Mehta, V.K.,, A Numerical Model for Rotational Autofrettage of Disks Based on von Mises Yield Criterion and its Application in Strengthening Flanged Disks Used for Joining High-Pressure Pipelines, International Journal of Applied Mechanics,, 15(3):2350022, 2023.
    11. Dutta, J., Haloi, P., Kumar, A. and Makunike, D.F., Thermodynamic Analysis of a Single-Flash Geothermal Power Plant in the Puga Valley, India, Transactions of the Indian National Academy of Engineering, Volume 9[Issue 1], pp. 189-198, 2023.
    12. Dutta, P.P., Chutia, L., Barbara, M., Banai, K., Das H, Thermal Performance Studies of a V-Type Baffle Absorber Plate Used in a Solar Heater., Sustainable Material, Design and Process: Select Proceeding of 8th International Conference on Advancement and Futuristic Trends in Mechanical and Material Engineering, , 2023.
    13. Nondy J.;Gogoi T.K., Proposal of a proton exchange membrane fuel cell-based hybrid system: Energy, exergy and economic analyses and tri-objective optimization, International Journal of Hydrogen Energy, 2023.
    14. Borah P.P.;Kashyap S.;Banerjee S.;Kirtania S., Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites, Mechanics of Advanced Composite Structures, 10[2], 233-246, 2023. DOI: 2-s2.0-85147285124.
    15. Nema V.K.;Singh A.;Chaurasiya P.K.;Gogoi T.K.;Verma T.N.;Tiwari D., Combustion, performance, and emission behavior of a CI engine fueled with different biodiesels: A modelling, forecasting and experimental study, Fuel, 339, 2023. DOI: 2-s2.0-85143853999. Scopus Indexed: Y, CrossRef Citations : 1 , Scopus Citations: 0
    16. Nondy J.;Gogoi T.K., 4E analyses of an intercooled-recuperative gas turbine-based CCHP system: Parametric analysis and tri-objective optimization, Thermal Science and Engineering Progress, 39, 2023. DOI: 2-s2.0-85148323284.
    17. Chetry A.;Kamal S.M.;Mehta V.K., A Numerical Model for Rotational Autofrettage of Disks Based on von Mises Yield Criterion and its Application in Strengthening Flanged Disks Used for Joining High-Pressure Pipelines, International Journal of Applied Mechanics, 2023. DOI: 2-s2.0-85147515699. Scopus Indexed: Y, Scopus Citations:
    18. Janardan Kundu, Victor Koledov, Richard M. Stephan, Zigang Deng, Manashita Borah, Binoy Krishna Roy, Svetlana von Gratowski, Avadh Pati, Satadru Kashyap, Design, testing and implementation of a linear state variable feedback controller for providing tracking/regulation of a large platform of a Maglev vehicle, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2023.
    19. Banerjee S.;Gogoi S.;Siddiqui H.R.;Kirtania S.;Kashyap S.;Bhadra R., Development of Hall-Petch and Hollomon models for thermo-mechanically treated Al-Cu-Mg alloys with trace additions of Sn, Advances in Materials and Processing Technologies (AMPT), 1--23, 2023.
    20. Gogoi, Sanjib and Rashid Siddiqui, Harun and Banerjee, Sanjib and Kashyap, Satadru and Kirtania, Sushen and Bhadra, Rakesh, Correlating fractography with mechanical properties of microalloyed 2219Al alloys under different thermo-mechanical conditions, Advances in Materials and Processing Technologies (AMPT), 1--24, 2023.
    21. Gogoi S.;Siddiqui H.R.;Banerjee S.;Kashyap S.;Kirtania S.;Bhadra R., Hall-Petch and Hollomon Modeling for Microalloyed 2219Al Alloys under Different Thermo-Mechanical Treatments, International Journal on Interactive Design and Manufacturing (IJIDeM), 2023.
    22. T.K. Gogoi, Dibyani Lahon, J. Nondy , Energy, exergy and exergoeconomic (3E) analyses of an organic Rankine cycle integrated combined cycle power plant, Thermal Science and Engineering Progress , 41, 101849, 2023.
    23. Pooja Dutta, Partha Pratim Dutta, and Paragmoni Kalita, Thermal performance study of a PV‑driven innovative solar dryer with and without sensible heat storage for drying of Garcinia Pedunculata, Environmental Science and Pollution Research, 2023.
    24. Pooja Dutta, Partha Pratim Dutta, and Paragmoni Kalita, Energy and exergy study of a novel multi-mode solar dryer without and with sensible heat storage for Garcinia pedunculata, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45, 9266–9282, 2023.
    25. Abdullah Bareen, Soumya Dash, Paragmoni Kalita, Kshirod Kumar Dash, Experimental investigation of an indirect solar dryer with PCM‑integrated solar collector as a thermal energy storage medium, Environmental Science and Pollution Research, 2023.

        Book Chapter

      1. Kashyap S.;Islam J., Optimization of the Mechanical Properties of Energy-Efficient Natural Fiber-Reinforced Polymeric Composites, Smart Innovation, Systems and Technologies, 301, 77-99, 2023. DOI: 2-s2.0-85137540731.
      2. Gogoi S.;Nath B.;Konwar B.;Bora A.;Banerjee S.;Kashyap S.;Kirtania S., Investigating Machinability of Microalloyed Al-Cu Alloys by Simulation of Cutting Force, Lecture Notes in Mechanical Engineering, 275-286, 2023. DOI: 2-s2.0-85140460154.
      3. Das B.M.;Kirtania S.;Banerjee S.;Kashyap S., Finite Element Analysis of Natural Hemp Fiber-Based Composite for Semi-elliptical Multi-leaf Spring, Lecture Notes in Mechanical Engineering, 225-237, 2023. DOI: 2-s2.0-85140491932.
      4. Bordoloi M.M.;Kirtania S.;Kashyap S.;Banerjee S., Investigation of Mechanical Properties of Carbon Fiber/Graphene Nanoplatelet/Epoxy Hybrid Nanocomposites, Lecture Notes in Mechanical Engineering, 211-223, 2023. DOI: 2-s2.0-85140482075.
      5. Borah P.P.;Kashyap S.;Kirtania S.;Banerjee S., Modelling of Structural Responses for Pineapple Leaf Fibre Epoxy Composite, Lecture Notes in Mechanical Engineering, 199-210, 2023. DOI: 2-s2.0-85140488700.
      6. Gogoi S.;Boruah R.;Ahmed M.;Banerjee S.;Kirtania S.;Kashyap S., Design and Fabrication of Impression Creep Testing Setup and Experimental Validation with 2219Al Alloys, Lecture Notes in Mechanical Engineering, 93-106, 2023. DOI: 2-s2.0-85140456208.
      7. Gogoi S.;Kumar D.;Banerjee S.;Kirtania S.;Kashyap S., Tribological Characterization of Microalloyed Al-Cu Alloys by Artificial Neural Network Modeling, Lecture Notes in Mechanical Engineering, 83-92, 2023. DOI: 2-s2.0-85140486464.
      8. Banerjee S.;Gogoi S., Optimizing the Peak-Ageing Conditions for Microalloyed 2219Al Alloys, Lecture Notes in Mechanical Engineering, 43-53, 2023. DOI: 2-s2.0-85140476991.
      9. Bora A.;Kalita A.P.;Bardalai M.;Dutta P.P., Modeling and Simulation of Plain and Corrugated Shell and Tube Heat Exchanger, Smart Innovation, Systems and Technologies, 301, 163-173, 2023. DOI: 2-s2.0-85137581258.
      10. Roy A.K., Kamal S.M., Patil R.U. and Rao V.V., Practicing Hydraulic Autofrettage for Strengthening a Gun Barrel: Critical Issues and Challenges, Engineering Pedagogy, 163–184, 2023.
      11. Dutta, P.P., Gogoi, S., Pramanik, K., Kumar. S., Dutta, P.P., Baruah, M.G., Design and development of an improved tricycle , Sustainable Material, Design and Process: Select Proceeding of 8th International Conference on Advancement and Futuristic Trends in Mechanical and Material Engineering, 2023.
      12. Priyanka Das, Shikha Bhuyan, Parametric analysis of forced convection over heated square cylinder using Lattice Boltzmann Method , Modeling > and > Analysis of Sustainable Renewable Energy System, 2023.
      13. Nondy J.;Gogoi T.K., 4E Analyses and Tri-objective Optimization of a Gas Turbine-Based Combined Heat and Power System, Lecture Notes in Mechanical Engineering, 2023.
      14. Kashyap, S., Additive Manufacturing for Presurgical and Postsurgical Planning: A State-of-the-Art Review, Additive Manufacturing Processes in Biomedical Engineering, 117--142, 2023.

        Conference Paper

      1. Baruah, M. G., Dutta, P. P., Das. H. , Study of waste copper powder embedded paraffin wax as a solar thermal energy storage material,, FIRHE 2023, 23/02/2023 to 25/02/2023 at Dibrugarh University, Assam, India. , 2023.
      2. Hazarika, R., Dutta, P. P., Deori, D., Talukdar, P, Vishwakarma, V., Swargiary, A., Nath, H. , Design and analysis of an improved rickshaw, FIRHE 2023, 23/02/2023 to 25/02/2023 at Dibrugarh University, Assam, India., 2023.
      3. Konwar, J., Sarmah, A., and Parashar, S., Dutta, P. P. , Modelling of a Dehumidifier for effective storage of seed. , FIRHE 2023, 23/02/2023 to 25/02/2023 at Dibrugarh University, Assam, India., 2023.
      4. Das, H, Dutta,P. P., Bardalai, M., and Baruah, M. G. , Waste Mild steel chips for performances enhancement of a Solar Air Heater in natural convection, FIRHE 2023, 23/02/2023 to 25/02/2023 at Dibrugarh University, Assam, India., 2023.
      5. Buragohain, B., Dutta, P. P., and Vishwakarma, V., A study on green tea manufacturing process for a prospective cottage level unit , FIRHE 2023, 23/02/2023 to 25/02/2023 at Dibrugarh University, Assam, India., 2023.