Publications (2021)

    Book

  1. Dilip Datta, Good Practices and Ethics in Research and Publication, Good Practices and Ethics in Research and Publication, 2021. Scopus Indexed: N, Scopus Citations:

    Article

  1. Nondy J.;Gogoi T.K., Performance comparison of multi-objective evolutionary algorithms for exergetic and exergoenvironomic optimization of a benchmark combined heat and power system, Energy, 233, 2021. DOI: 2-s2.0-85109066132. Scopus Indexed: N, CrossRef Citations : 2 , Scopus Citations: 0
  2. Nondy J.;Gogoi T.K., Exergoeconomic investigation and multi-objective optimization of different ORC configurations for waste heat recovery: A comparative study, Energy Conversion and Management, 245, 2021. DOI: 2-s2.0-85112776415. Scopus Indexed: N, CrossRef Citations : 35 , Scopus Citations: 0
  3. Kamal S.M.;Dixit U.S., Design of a disk-mandrel assembly for achieving rotational autofrettage in the disk, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235[13], 2452-2467, 2021. DOI: 2-s2.0-85090057537. Scopus Indexed: N, CrossRef Citations : 3 , Scopus Citations: 4
  4. Nondy J.;Gogoi T.K., A comparative study of metaheuristic techniques for the thermoenvironomic optimization of a gas turbine-based benchmark combined heat and power system, Journal of Energy Resources Technology, Transactions of the ASME, 143[6], 2021. DOI: 2-s2.0-85107849315. Scopus Indexed: N, CrossRef Citations : 4 , Scopus Citations: 0
  5. Kalita P.;Dass A.K.;Hazarika J., A new approach for numerical-diffusion control of flux-vector-splitting schemes for viscous-compressible flows, International Journal of Numerical Methods for Heat and Fluid Flow, 31[1], 497-518, 2021. DOI: 2-s2.0-85099175484. Scopus Indexed: N, Scopus Citations: 0
  6. Dutta P.;Dutta P.P.;Kalita P., Thermal performance studies for drying of Garcinia pedunculata in a free convection corrugated type of solar dryer, Renewable Energy, 163, 599-612, 2021. DOI: 2-s2.0-85090574001. Scopus Indexed: N, CrossRef Citations : 13 , Scopus Citations: 0
  7. Bhuyan S.;Biswas A., Comparative investigation of Savonius and hybrid H-Savonius wind rotor- an energy and exergy analysis, EAI Endorsed Transactions on Energy Web, 8[32], 01/Jun, 2021. DOI: 2-s2.0-85103344085. Scopus Indexed: N, Scopus Citations: 0
  8. Dutta, P.P., Begum, S.S., Goswami, A.P., Jangid, H., Doley, T., Bardalai, M., Dutta, P.P., Modelling and performance evaluation of a small parabolic trough collector (PTC) for possible purification of drained water. , Materials Today: Proceeding, 2021. Scopus Indexed: N, Scopus Citations: 0
  9. Dutta, P. P., Sharma, D., Das, H., Sharma, A., Dutta P., Dutta P.P., Computational fluid dynamics and experimental analysis of a corrugated plate duct , Mathematical Forum , 28 (1), 01/18, 2021. Scopus Indexed: N, Scopus Citations:
  10. Partha Pratim Dutta, Supratim Gogoi, Kausik Pramanik, Sudhansh Kumar, Polash P. Dutta, Mrinmoy G. Baruah, Design and Development of an Improved Tricycle, International Journal of Surface Engineering & Materials Technology, 10, 2021. Scopus Indexed: N, Scopus Citations:
  11. Bhagowati S; Bardalai M; Dutta PP; Dutta Polash P, Design and Comparative Study of Shell and Tube Heat Exchanger with Different Baffle Configurations, ADBU Journal of Engineering Technology, 10, 2021. Scopus Indexed: N, Scopus Citations:
  12. Shukla, A.K., Dutta, P.P., Bardalai, M., Dutta, Polash P. , Performance Assessment of a Single-Cylinder Diesel Engine with Diesel and Waste Cooking Oil Blends Preheated by Engine Exhaust Gas., International Journal of Vehicle Structures & Systems, 14(2), 15-157, 2021.
  13. Bhagowati, S., Bardalai, M., Dutta, P.P., Dutta, Polash P., Design and Comparative Study of Shell and Tube Heat Exchanger with Different Baffle Configurations., ADBU Journal of Engineering Technology , 10 (4), 01/Jun, 2021.
  14. Gogoi S.;Banerjee S.;Saha B.;Rajkonwar U., Modeling of Flow Curve for 2219Al Alloys Microalloyed with Cd, Indian Science Cruiser, 35(1), 25, 2021.

      Book Chapter

    1. B Chowdhury, SK Deb, Optimizing Thermoforming of Refrigerator Liners to Reduce Liner Rejection Rate—A Case Study Using Fractional Factorial Design of Experiments, Lecture Notes in Mechanical Engineering, 225-238, 2021. Scopus Indexed: N, Scopus Citations:
    2. Bardalai M.;Das B.;Dutta P.;Mahapatra S., Thermal Performance Study of Bamboo and Coal Co-gasification in a Downdraft Gasifier, Smart Innovation, Systems and Technologies, 206, 15-28, 2021. DOI: 2-s2.0-85104846054. Scopus Indexed: N, Scopus Citations: 0
    3. Dutta P.P.;Kakati H.;Bardalai M.;Dutta P.P., Performance Studies with Trapezoidal, Sinusoidal and Square Corrugated Aluminium Alloy (AlMn1Cu) Plate Ducts, Smart Innovation, Systems and Technologies, 206, 751-774, 2021. DOI: 2-s2.0-85104875112. Scopus Indexed: N, CrossRef Citations : 4 , Scopus Citations: 0
    4. Bardalai M.;Mahanta D.K., Characterization of Bael Shell (Aegle marmelos) Pyrolytic Biochar, Lecture Notes in Mechanical Engineering, 747-760, 2021. DOI: 2-s2.0-85101221574. Scopus Indexed: N, Scopus Citations:
    5. Kapila K.;Samanta S.;Kirtania S., Fabrication and Characterization of Ramie Fiber Based Hybrid Composites, Lecture Notes in Mechanical Engineering, 839-848, 2021. DOI: 2-s2.0-85101240122. Scopus Indexed: N, CrossRef Citations : 1 , Scopus Citations: 0
    6. R. Barpatragohain, N. Bharali, P.P. Dutta, Thermal Performance Evaluation of an Improved Biomass Cook stove for Domestic. Applications. , Proceedings of International Conference on Thermofluids,, 579-590, 2021. Scopus Indexed: N, Scopus Citations:
    7. P.J. Saikia, P.P. Dutta, P. Kalita, Simulation and Experimental Performance Studies of a Computerized Spark Ignition Engine., Recent Advances in Mechanical Engineering, 441-454, 2021. Scopus Indexed: N, Scopus Citations:
    8. M. Bardalai, B. Das, P.P. Dutta, S. Mahapatra , Thermal Performance Study of Bamboo and Coal Co-gasification in a Downdraft Gasifier. , Modeling, Simulation and Optimization: Proceedings of CoMSO 2020, , 15-28, 2021. Scopus Indexed: N, Scopus Citations:
    9. Syed Asfak Alam, Jitul Nath, Kumarika Gohain, Partha Pratim Dutta, Polash P. Dutta, Raktimjyoti Borpatragohain, Design of a Manual Rice Transplanting Machine, Advances in Mechanical and Industrial Engineering, 2021. Scopus Indexed: N, Scopus Citations:

      Conference Paper

    1. Bora J.;Kirtania S., Enhancement of elastic and fracture properties of carbon nanotube-reinforced aluminum laminated composites, AIP Conference Proceedings, 2341, 2021. DOI: 2-s2.0-85105978841. Scopus Indexed: N, Scopus Citations:
    2. Sarmah S.;Datta D., Product Priority Problem: A Multi-objective Optimization Approach for Product Development Based on Customers’ Priority, Smart Innovation, Systems and Technologies, 206, 101-114, 2021. DOI: 2-s2.0-85104891069. Scopus Indexed: N, Scopus Citations:
    3. Datta D.;Deb C.;Hafila A.;Das D., Approximating Non-intersecting Closed Curves Through Four-Bar Linkage Mechanism, Smart Innovation, Systems and Technologies, 206, 115-128, 2021. DOI: 2-s2.0-85104857712. Scopus Indexed: N, Scopus Citations:
    4. Deka D.;Datta D., Optimization of Crude Oil Preheating Process Using Evolutionary Algorithms, Smart Innovation, Systems and Technologies, 206, 129-141, 2021. DOI: 2-s2.0-85104864671. Scopus Indexed: N, Scopus Citations:
    5. Datta D.;Saikia A.;Kalita Z., Stability of Female Bicyclists on Sudden Braking, Smart Innovation, Systems and Technologies, 206, 153-163, 2021. DOI: 2-s2.0-85104824959. Scopus Indexed: N, Scopus Citations:
    6. Datta D.;Kalita Z.;Saikia S., Stability of Bicycle at Low Speed, Smart Innovation, Systems and Technologies, 206, 165-175, 2021. DOI: 2-s2.0-85104844439. Scopus Indexed: N, Scopus Citations:
    7. Shivhare S.B.;Kalita P.;Haloi P., Effects of Numerical Dissipation and Dispersion on Computing the Convection of a Sharp Scalar Cone, Smart Innovation, Systems and Technologies, 206, 43-55, 2021. DOI: 2-s2.0-85104870977. Scopus Indexed: N, Scopus Citations:
    8. Mahmun A.;Kirtania S., Evaluation of elastic properties of graphene nanoplatelet/epoxy nanocomposites, Materials Today: Proceedings, 44, 1531-1535, 2021. DOI: 2-s2.0-85105585657. Scopus Indexed: N, CrossRef Citations : 7 , Scopus Citations: 0
    9. Das B.;Dutta P.P.;Bardalai M.;Dutta P.P., Comparative study on performance of high volume low speed (HVLS) fans with high-speed fans for the use in dairy barns, Materials Today: Proceedings, 47, 4606-4610, 2021. DOI: 2-s2.0-85117757322. Scopus Indexed: N, Scopus Citations:
    10. Dutta P.P.;Begum S.S.;Jangid H.;Goswami A.P.;Doley T.;Bardalai M.;Dutta P.P., Modeling and performance evaluation of a small solar parabolic trough collector (PTC) for possible purification of drained water, Materials Today: Proceedings, 47, 4226-4234, 2021. DOI: 2-s2.0-85111832181. Scopus Indexed: N, CrossRef Citations : 7 , Scopus Citations: 0
    11. Sarvankar S.S.;Phukan A.A.;Konwar A.;Kalita P., Effects of Gurney Flap and Suction Slots on the Aerodynamics of a NACA0012 Airfoil, Smart Innovation, Systems and Technologies, 206, 29-42, 2021. DOI: 2-s2.0-85104897810. Scopus Indexed: N, Scopus Citations: 0
    12. Saikia P.J.;Dutta P.P.;Kalita P., Simulation and Experimental Performance Studies of a Computerized Spark Ignition Engine, Lecture Notes in Mechanical Engineering, 441-454, 2021. DOI: 2-s2.0-85101255126. Scopus Indexed: N, CrossRef Citations : 1 , Scopus Citations: 0
    13. Dutta P.;Dutta P.P.;Kalita P.;Goswami P.;Choudhury P.K., Energy analysis of a mixed-mode corrugated aluminium alloy (AlMn1Cu) plate solar air heater, Materials Today: Proceedings, 47, 3352-3357, 2021. DOI: 2-s2.0-85117707678. Scopus Indexed: N, CrossRef Citations : 3 , Scopus Citations: 0
    14. Kamal S.M.;Aziz F., Estimation of the stresses in rotational autofrettage of thick-walled pressure vessels using von mises yield criterion, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 2, 2021. DOI: 2-s2.0-85117907020. Scopus Indexed: N, Scopus Citations:
    15. Kakati J.;Gogoi T.K.;Pal S.;Saha U.K., Potentiality of yellow oleander (Thevetia Peruviana) seed oil as an alternative diesel fuel in compression ignition engines, Proceedings of ASME 2021 Internal Combustion Engine Division Fall Technical Conference, ICEF 2021, 2021. DOI: 2-s2.0-85120613978. Scopus Indexed: N, Scopus Citations:
    16. Sharma A.;Dutta P.P., Exergy analysis of a solar thermal energy powered tea withering trough, Materials Today: Proceedings, 47, 3123-3128, 2021. DOI: 2-s2.0-85117714236. Scopus Indexed: N, CrossRef Citations : 1 , Scopus Citations: 0
    17. Barpatragohain R.;Bharali N.;Dutta P.P., Thermal Performance Evaluation of an Improved Biomass Cookstove for Domestic Applications, Lecture Notes in Mechanical Engineering, 29, 579-590, 2021. DOI: 2-s2.0-85097683746. Scopus Indexed: N, Scopus Citations: 0
    18. P. Bhuyan, P. Borah, T.K. Gogoi, Energetic and Exergetic Performance Comparison of a Hybrid Solar Kalina Cycle at Solar and Solar Storage Mode of Operations, 7th International Conference on Advances in Energy Research, 2021. Scopus Indexed: N, Scopus Citations: 0
    19. Prabin Haloi, Manpreet Singh, Nikhil Saurabh, Abhishek Kumar, Advanced exergy analysis of a MHD power plant, International Conference on Energy Conversion and Thermo-fluid Systems (i-CONECTS 2021) , 2021.
    20. Baruah, P., Dutta, P,P., A Review and Design of Improved Solar Dryer for Drying Agricultural Crops., International Symposium on materials of the millennium: Emerging trends and future prospects-2021, 19/09/2021 to 21/09/2021, Prandit Deendayal Energy University-Gandhinagar., 2021.
    21. Baruah, M. G., Dutta, P.P., Das, H. , A Study on Thermal Properties of Paraffin Wax Embedded with Copper Powder for Possible Solar Thermal Energy Storage. I, nternational Conference on Recent Development on Materials, Reliability, Safety and Environmental at NIT Jalandhar 25/06/2021 to 27/06/2021., 2021.
    22. Bharali, H., Dutta, P.P., Bordoloi, H., Gohain, R.J.B. , Modelling and simulation of an improved natural draft biomass fired cook stove. , International Conference on Recent Development on Materials, Reliability, Safety and Environmental at NIT Jalandhar 25/06/2021 to 27/06/2021., 2021.
    23. Das, H., Dutta, P., Baruah, M.G. , Performance study of a solar air heater for possible paraffin wax thermal energy storage. , International Conference on Recent Development on Materials, Reliability, Safety and Environmental at NIT Jalandhar 25/06/2021 to 27/06/2021., 2021.
    24. Borbora, M., Chutiya, L., Bania, K., Dutta, P.P., Baruah, P. , Modelling, simulation of an efficient V-type baffles solar air heaters. , International Conference on Recent Development on Materials, Reliability, Safety and Environmental at NIT Jalandhar 25/06/2021 to 27/06/2021., 2021.
    25. Gohain, R.J.B., Dutta, P.P. , Simulation and experimental performance studies of a domestic improved biomass cook stove. I, nternational Conference on Recent Development on Materials, Reliability, Safety and Environmental at NIT Jalandhar 25/06/2021 to 27/06/2021., 2021.
    26. Das,B., Dutta, P.P., Dutta, P.P., Bardoloi, M. , Comparative study on performance of High Volume Low Speed (HVLS) fans with high speed fans for the use in dairy barns., FRESM21; 23/04/2021 to 24/04/2021; CRM Institute of Technology, Bangalore., 2021.
    27. Dutta, P.P., Begum, S.S., Jangid, H., Goswami, A.P., Doley T., Bardoloi, M., Dutta, P.P. , Modeling and performance evaluation of a small solar parabolic trough collector (PTC) for possible purification of drained water. , FRESM21; 23/04/2021 to 24/04/2021; CRM Institute of Technology, Bangalore., 2021.
    28. Shukla A.K., Dutta, P.P., Bardoloi, M., Dutta, P.P. , Performance assessment of a single cylinder diesel engine with diesel and waste cooking oil blends preheated by engine exhaust gas. , 3rd International Conference On Advances in Mechanical Engineering and Nanotechnology - (ICAMEN 2021) 18/03/2021 to 19/03/2021, 2021.
    29. Sharma, A., Dutta, P.P. , Exergy analysis of solar thermal energy powered tea withering trough. , 3rd International Conference On Advances in Mechanical Engineering and Nanotechnology - (ICAMEN 2021) 18/03/2021 to 19/03/2021, 2021.

          Inproceedings

        1. Kashyap, Satadru and Das, Debanil, Study of effects of weathering on natural fiber composites, , 1206, 12002, 2021.