Publications (2020)

    Book

  1. Dixit U.S., Kamal S.M. and Shufen R., Autofrettage Processes: Technology and Modeling, Autofrettage Processes: Technology and Modeling, 1-276, 2020. Scopus Indexed: N, Scopus Citations:

    Article

  1. Gogoi T.K.;Hazarika P., Comparative assessment of four novel solar based triple effect absorption refrigeration systems integrated with organic Rankine and Kalina cycles, Energy Conversion and Management, 226, 2020. DOI: 2-s2.0-85094608740. Scopus Indexed: N, CrossRef Citations : 8 , Scopus Citations: 0
  2. Nondy J.;Gogoi T.K., Comparative performance analysis of four different combined power and cooling systems integrated with a topping gas turbine plant, Energy Conversion and Management, 223, 2020. DOI: 2-s2.0-85089347884. Scopus Indexed: N, CrossRef Citations : 10 , Scopus Citations: 0
  3. Mehta V.K., Improved Nelder–Mead algorithm in high dimensions with adaptive parameters based on Chebyshev spacing points, Engineering Optimization, 52[10], 1814-1828, 2020. DOI: 2-s2.0-85075754631. Scopus Indexed: N, CrossRef Citations : 2 , Scopus Citations: 4
  4. Kamal S.M., Estimation of optimum rotational speed for rotational autofrettage of disks incorporating Bauschinger effect, Mechanics Based Design of Structures and Machines, 2020. DOI: 2-s2.0-85087363344. Scopus Indexed: N, CrossRef Citations : 3 , Scopus Citations: 0
  5. T.K. Gogoi , P. Hazarika, Comparative assessment of four novel solar based triple effect absorption refrigeration systems integrated with organic Rankine and Kalina cycles, Energy Conversion and Management, 226, 113561, 2020. Scopus Indexed: N, Scopus Citations: 0
  6. J. Nondy, T.K. Gogoi, Comparative performance analysis of four different combined power and cooling systems integrated with a topping gas turbine plant, Energy Conversion and Management, Volume 223, 113242, 2020. Scopus Indexed: N, Scopus Citations: 0
  7. P. P.Dutta, D. Sharma, H. Das, A. Sharma, P.Dutta, P. P. Dutta, COMPUTATIONAL FLUID DYNAMICS AND EXPERIMENTAL ANALYSIS OF A CORRUGATED PLATE DUCTCOMPUTATIONAL FLUID DYNAMICS AND EXPERIMENTAL ANALYSIS OF A CORRUGATED PLATE DUCT, Mathematical Forum, 28, 2020. Scopus Indexed: N, Scopus Citations:
  8. Dikshita Nath , Danish Ansar , Biswajit Das and Shikha Bhuyan, Experimental analysis of solar water heater with compound parabolic concentrator, EAI Endorsed Transactions on Energy Web, 2020.
  9. Gogoi S.;Bhowmick S.;Banerjee S. , Development of A Computational Model to Investigate Precipitation Kinetics in Al Alloy, Indian Science Cruiser, 34(5), 52, 2020.

      Book Chapter

    1. Kalita Z.;Datta D., Corridor Allocation as a Constrained Optimization Problem Using a Permutation-Based Multi-objective Genetic Algorithm, Modeling and Optimization in Science and Technologies, 16, 335-358, 2020. DOI: 2-s2.0-85078213149. Scopus Indexed: N, CrossRef Citations : 5 , Scopus Citations: 4
    2. Deka A.;Datta D., Geometric Size Optimization of Annular Step Fin Array for Heat Transfer by Natural Convection, Modeling and Optimization in Science and Technologies, 16, 385-402, 2020. DOI: 2-s2.0-85078212294. Scopus Indexed: N, CrossRef Citations : 3 , Scopus Citations: 4
    3. Kalita Z.;Datta D., The Constrained Single-Row Facility Layout Problem with Repairing Mechanisms, Modeling and Optimization in Science and Technologies, 16, 359-383, 2020. DOI: 2-s2.0-85078085073. Scopus Indexed: N, CrossRef Citations : 2 , Scopus Citations: 4
    4. Haloi P.;Gogoi T., Performance Analysis of a Coal-Fired Open Cycle MHD Plant at Constant Subsonic Inlet Nozzle Mach Number with Variation in Nozzle–Area Ratio, Lecture Notes in Mechanical Engineering, 709-716, 2020. DOI: 2-s2.0-85079130061. Scopus Indexed: N, CrossRef Citations : 1 , Scopus Citations: 0
    5. Banerjee S.;Bhadra R.;Gogoi S.;Dutta R., Investigating Weldability in Microalloyed Al Alloys, Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering (LNME), 271-279, 2020. DOI: 2-s2.0-85079181786. Scopus Indexed: N, CrossRef Citations : 6 , Scopus Citations: 0
    6. Prabin Haloi, Tapan Kumar Gogoi, Exergy modeling of a coal-fired MHD power plant, Advances in applied mechanical engineering, Lecture notes in mechanical engineering, 2020. Scopus Indexed: N, Scopus Citations:
    7. PP Dutta, A Kumar, A Singh, K Saha, B Hazarika, A Narzary, T Sharma, Design and development of voice controllable wheelchair, IEEE proceeding, 2020. Scopus Indexed: N, CrossRef Citations : 2 , Scopus Citations: 0
    8. Bardalai, M., Yamin, Md. A., Gogoi, B and Goswami, R, Heat Transfer in Non Circular Microchannels Using Water and Ethylene Glycol as Base Fluids with Zn and ZnO Nanoparticles, Characterization, Testing, Measurement and Metrology, 57-75, 2020. Scopus Indexed: N, Scopus Citations:
    9. Hrishikesh Pathak, SanghamitraDas, Rakesh Doley, Satadru Kashyap, Optimization of cutting parameters for AISI H13 Tool steel by Taguchi method and Artificial Neural Network, Deep Learning and Neural Networks:Concepts, Methodolgies, Tools and Applications, 531-551, 2020. Scopus Indexed: N, Scopus Citations: 0
    10. Satadru Kashyap, Dipyaman Gogoi, Study of industrial lime sludge waste filled coir-jute reinforced polyester hybrid composites, Spectrum Vol. 1, 1, 22-37 , 2020. Scopus Indexed: N, Scopus Citations:

      Conference Paper

    1. Mehta V.K.;Dasgupta B., A Multi-objective Optimization Method Based on Nelder–Mead Simplex Search Method, Lecture Notes in Mechanical Engineering, 655-668, 2020. DOI: 2-s2.0-85079689926. Scopus Indexed: N, CrossRef Citations : 1 , Scopus Citations: 4
    2. Deka H.;Biswas G.;Dalal A., A Coupled Level Set and Volume-of-Fluid Method for Modeling Two-Phase Flows, Lecture Notes in Mechanical Engineering, 65-73, 2020. DOI: 2-s2.0-85079170992. Scopus Indexed: N, Scopus Citations: 4
    3. Deka A.;Datta D., Optimum Annular Plane Fin Profile with Uniformly Varying Thickness, Lecture Notes in Mechanical Engineering, 427-435, 2020. DOI: 2-s2.0-85087849009. Scopus Indexed: N, Scopus Citations:
    4. Deka A.;Datta D., A Comparative Analysis of Annular Fin Array Under Multi-objective Optimization, Lecture Notes in Mechanical Engineering, 195-203, 2020. DOI: 2-s2.0-85087850080. Scopus Indexed: N, Scopus Citations:
    5. Sahachar Reddy T.;Banik T.;Velagala R.;Kashyap S., A study and modeling of cutting forces in dry turning of heat treated AISI H13 tool steel with brazed tungsten carbide tip, Materials Today: Proceedings, 24, 704-713, 2020. DOI: 2-s2.0-85090547248. Scopus Indexed: N, CrossRef Citations : 1 , Scopus Citations: 0
    6. Haloi P.;Gogoi T.K., Exergy Modelling of a Coal-Fired MHD Power Plant, Lecture Notes in Mechanical Engineering, 81-89, 2020. DOI: 2-s2.0-85079635114. Scopus Indexed: N, CrossRef Citations : 3 , Scopus Citations: 0
    7. B Chowdhury, D Bhuyan, S Borthakur, S Das, Effect of blade length and material on the performance of a wind turbine – An experimental study, National conference on Advances in Mechanical Engineering, 2020. Scopus Indexed: N, Scopus Citations:
    8. B Chowdhury, SK Deb, Time series analysis of manufacturing defects – A case of refrigerator liner manufacturing, International Virtual Conference on Applied Science, Technology, Management and Language Studies, 2020. Scopus Indexed: N, Scopus Citations:
    9. B Saikia, B Chowdhury, Analysis of heat transfer rate and overall heat transfer coefficient of a shell and tube heat exchanger using Design of Experiments, International Virtual Conference on Applied Science, Technology, Management and Language Studies, 2020. Scopus Indexed: N, Scopus Citations:
    10. B Saikia, B Chowdhury, Analysis of Performance Parameters of a Shell and Tube Heat Exchanger using Design of Experiments, International Virtual Conference on Applied Science, Technology, Management and Language Studies, 2020. Scopus Indexed: N, Scopus Citations:
    11. Baishya, A. Kamal, B., Kumar, S., Bardalai, M, Dutta, P.P., Design of a small scale drainage cleaning machine. , ICAMIE 2020; 11/12/2020 to 13/12/2020, KIIT University., 2020.
    12. Dutta, H., Dhungana L, Chakraborty, B., Dutta, P.P., Bardoloi, M., Dutta, D. , Thermal modelling of a solar parabolic trough collector for low temperature applications. , ICAMIE 2020; 11/12/2020 to 13/12/2020, KIIT University., 2020.
    13. Alam, S.A., Nath, J., Gohain, K., Dutta, P.P., Dutta, P.P., Borpatragohain R.J. , Design and Modelling of Manual Rice Transplanting machine. , ICAMIE 2020; 11/12/2020 to 13/12/2020, KIIT University., 2020.

        Incollection

      1. Mehta, Vivek Kumar and Dasgupta, Bhaskar, A Multi-objective Optimization Method Based on Nelder--Mead Simplex Search Method, , 655--668, 2020. Scopus Indexed: N, Scopus Citations:

          Letter

        1. Bora J.;Kirtania S., Comparative study of elastic properties and mode I fracture energy of carbon nanotube/epoxy and carbon fibre/epoxy laminated composites, Micro and Nano Systems Letters, 8[1], 2020. DOI: 2-s2.0-85092130919. Scopus Indexed: N, Scopus Citations: 0