Publications (2016)

    Book

  1. Binu Sukumar, Joyson Silva P, Strength of Materials, Strength of Materials, 2016. Scopus Indexed: N, Scopus Citations:

    Article

  1. Kalita P.;Dass A.K.;Sarma A., Effects of Numerical Diffusion on the Computation of Viscous Supersonic Flow Over a Flat Plate, International Journal of Applied and Computational Mathematics, 2[4], 663-678, 2016. DOI: 2-s2.0-85016399475. Scopus Indexed: N, CrossRef Citations : 4 , Scopus Citations: 3
  2. Kamal S.;Dixit U., A study on enhancing the performance of thermally autofrettaged cylinder through shrink-fitting, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 138[9], 2016. DOI: 2-s2.0-84975794242. Scopus Indexed: N, CrossRef Citations : 10 , Scopus Citations: 4
  3. Kakati J.;Gogoi T., Biodiesel production from Kutkura (Meyna spinosa Roxb. Ex.) fruit seed oil: Its characterization and engine performance evaluation with 10% and 20% blends, Energy Conversion and Management, 121, 152-161, 2016. DOI: 2-s2.0-84969533110. Scopus Indexed: N, CrossRef Citations : 63 , Scopus Citations: 4
  4. Bardalai M.;Mahanta D., Production of pyrolysis oil from areca tree using a fixed bed reactor, Journal of Engineering Research, 4[2], 172-187, 2016. DOI: 2-s2.0-84980316337. Scopus Indexed: N, CrossRef Citations : 2 , Scopus Citations: 1
  5. Bardalai M.;Mahanta D., Characterisation of the pyrolysis oil derived from bael shell (Aegle marmelos), Environmental Engineering Research, 21[2], 180-187, 2016. DOI: 2-s2.0-84975152228. Scopus Indexed: N, CrossRef Citations : 6 , Scopus Citations: 4
  6. Kamal S.M.;Dixit U.S., A comparative study of thermal and hydraulic autofrettage, Journal of Mechanical Science and Technology, 30[6], 2483-2496, 2016. DOI: 2-s2.0-84975883790. Scopus Indexed: N, CrossRef Citations : 9 , Scopus Citations: 4
  7. Kalita P.;Dass A.K., A diffusion-regulated scheme for the compressible Navier-Stokes equations using a boundary-layer sensor, Computers and Fluids, 129, 91-100, 2016. DOI: 2-s2.0-84975767774. Scopus Indexed: N, CrossRef Citations : 4 , Scopus Citations: 4
  8. Gogoi T., Estimation of Operating Parameters of a Water-LiBr Vapor Absorption Refrigeration System Through Inverse Analysis, Journal of Energy Resources Technology, Transactions of the ASME, 138[2], 2016. DOI: 2-s2.0-85050578716. Scopus Indexed: N, CrossRef Citations : 14 , Scopus Citations: 4
  9. Gogoi T.;Konwar D., Exergy analysis of a H2O-LiCl absorption refrigeration system with operating temperatures estimated through inverse analysis, Energy Conversion and Management, 110, 436-447, 2016. DOI: 2-s2.0-84952332583. Scopus Indexed: Y, CrossRef Citations : 42 , Scopus Citations: 4
  10. Kamal S.M.;Borsaikia A.C.;Dixit U.S., Experimental assessment of residual stresses induced by the thermal autofrettage of thick-walled cylinders, Journal of Strain Analysis for Engineering Design, 51[2], 144-160, 2016. DOI: 2-s2.0-84959038467. Scopus Indexed: N, CrossRef Citations : 21 , Scopus Citations: 4
  11. Talukdar K.;Gogoi T., Exergy analysis of a combined vapor power cycle and boiler flue gas driven double effect water-LiBr absorption refrigeration system, Energy Conversion and Management, 108, 468-477, 2016. DOI: 2-s2.0-84948414438. Scopus Indexed: Y, CrossRef Citations : 29 , Scopus Citations: 4
  12. Dutta, P.P, Konwar, A, Baruah A, Kumar, V , A technical review of lawn mower technology. , ADBU Journal of Engineering Technology , 4 (1), 179-182, 2016. Scopus Indexed: N, Scopus Citations:
  13. Dutta, P.P., Saharia J., Kumar T., Gupta A., Singh A.K. , Fuel characterization of some indigenous biomass. , Journal of Biofuel and Bioenergy , 1(2), 184-192., 2016. Scopus Indexed: N, Scopus Citations:
  14. Saxena M and Kirtania S, Stiffness analysis of symmetric cross-ply laminated composite plates., ADBU Journal of Engineering and Technology, 4, 76-81, 2016. Scopus Indexed: N, Scopus Citations:
  15. Nath, M.K., Chowdhury, A., Dutta, P.P., Finite Element Simulation For Thermal Analysis In Laser Forming Of D36 Ship Building Steel, ADBU Journal of Engineering Technology, 2016. Scopus Indexed: N, Scopus Citations:
  16. S Biswas, B Chowdhury, Industrial Applications and Practices of Six Sigma–A Literature Review, International Advanced Research Journal in Science, Engineering and Technology, 3, 176-179, 2016. Scopus Indexed: N, Scopus Citations:
  17. Banerjee S,Gogoi S., Influence of Trace Addition of Cd on the Hardness and Impact Properties of 2219 Al Alloy, Journal of Basis and Applied Engineering Research (JBAER), 3(13), 1202, 2016.
  18. Banerjee S.;Das N., Influence of Trace Addition of Cd on the Tribological Characteristics of 2219 Al Alloy at Different Working Conditions, Journal of Material Science and Mechanical Engineering (JMSME), 3(8), 518, 2016.
  19. Banerjee S.;Mazumder I., Characterizing Machinability of Microalloyed 2219 Al Alloy, Journal of Material Science and Mechanical Engineering (JMSME), 3(8), 522, 2016.

        Conference Paper

      1. Trinavee K.;Gogoi T.K.;Pandey M., Laminar convective heat transfer characteristic of Al2O3/water nanofluid in a circular microchannel, Journal of Physics: Conference Series, 759[1], 2016. DOI: 2-s2.0-85002202363. Scopus Indexed: N, CrossRef Citations : 8 , Scopus Citations: 1
      2. Gogoi T.;Kakati J., Characterization of biodiesel produced from terminalia seed oil and engine performance evaluation with 10% and 20% blending, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 6A-2016, 2016. DOI: 2-s2.0-85021982600. Scopus Indexed: N, Scopus Citations: 0
      3. Prasun Mazumdar, Y. H. K. Reddy, Manash P. Borsaikia, Satadru Kashyap, Drilling of Bamboo Fiber Reinforced Polymeric Composites, Conference on Recent Trends in Mechanical Engineering, Institute of Engineers (Assam), 21th – 22nd October, 2016, Institute of Engineers, Guwahati, Assam, 2016. Scopus Indexed: N, Scopus Citations:
      4. Prasun Mazumdar, Y. H. K. Reddy, Manash P. Borsaikia, Satadru Kashyap, Optimization of Process Parameters in Drilling of Bamboo Fibre Reinforced Polymeric Composites, International Conference on “Recent Research Development in Science, Engineering and Management (ICRRDSEM-16), 29 May, 2016, Pune (India), 2016. Scopus Indexed: N, Scopus Citations:
      5. Kamal S.M., Dixit U.S., Liu Q., Silberschmidt V.V. and Roy A., Thermo-elasto-plastic finite element stress analysis of thick-walled cylinder and its comparison with plane stress and plane strain analyses, The 12th World Congress on Computational Mechanics (WCCM XII) & the 6th Asia-Pacific Congress on Computational Mechanics (APCOM VI), July 24−29, 2016, Coex, Seoul, South Korea., 2016. Scopus Indexed: N, Scopus Citations:
      6. K. Talukdar, T.K. Gogoi, THERMODYNAMIC ANALYSIS OF A COMBINED VAPOR POWER CYCLE AND ABSORPTION REFRIGERATION SYSTEM, Global Conference on Renewable Energy (GCRE) March 04-06, 2016, NIT, Patna. India, Paper No.-GCRE 31415, 2016. Scopus Indexed: N, Scopus Citations:
      7. K. Talukdar, T.K. Gogoi, Comparative analysis of performance of a combined power and cooling system with vapor compression and absorption refrigeration system as bottoming cycle, COMET 2016, COMETP008, 58-65, 2016. Scopus Indexed: N, Scopus Citations:

        Conference Proceedings

      1. P. Haloi, S. Bajpai, A. Chetri, A. Gond, Steady MHD pure Couette flow in a square channel under uniform transverse magnetic field, International Workshop and Conference on ANALYSIS AND APPLIED MATHEMATICS-IWCAAM’16, 149-158, 2016. Scopus Indexed: N, Scopus Citations:
      2. Prabin Haloi, Puja Koch, Pranavdeep Kumar and Shibanu Borah, On steady MHD flow of a Newtonian fluid in a circular pipe under uniform transverse magnetic field , Engineering Problems and Application of Mathematics - 2016, 2016. Scopus Indexed: N, Scopus Citations:
      3. Nath, M.K., Chowdhury, A., Dutta, P.P. , Thermal Analysis Of Laser Forming Process For D36 Ship Building Steel By Using Finite Element Method., National Conference on Emerging Global Trends in Engineering & Technology (EGTET. 2016., 2016. Scopus Indexed: N, Scopus Citations:
      4. Kamal S.M. and Dixit U.S., Fatigue life enhancement of thermally autofrettaged cylinders through shrink-fit, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR2016), December 16−18, 2016, College of Engineering Pune, India., 2016. Scopus Indexed: N, Scopus Citations: