Standard View White on Black Black on White White on Blue Decrease font size Reset font size Increase font size Screen Reader Screen Reader

Dr. Tapan Kumar Gogoi

 

Associate Professor

Email:tapan_g@tezu.ernet.in

Phone: Extn. 5854

Mobile: 9435471300

Specialization: Thermal, Energy & Environmental Engg.

 

Areas of interest:

Thermodynamics, modelling of advanced energy systems, Solid oxide fuel cell, I.C. Engines, Fluid Mechanics, Heat Transfer, Numerical Heat transfer and Fluid Flow etc.

 

Area of Research:

 

1. Thermodynamic analysis of combined power and cooling system

2. Modelling of solid oxide fuel cell (SOFC) integrated Gas turbine and steam turbine (GT-ST) power cycle

3. Performance, Combustion and Emission Analyses of diesel engine fuelled with biodiesel/alternate fuels

4. Numerical Simulation of Diesel Engine processes

5. Computational heat transfer and fluid flow

 

 Education:

 B.E., Mechanical Engineering, Assam Engg. College, Guwahati

 M.Tech.,Mechanical Engineering, IIT, Kharagpur

 Ph.D., Tezpur University

 

Ph D student guided: Two ongoing

 

Ongoing Project: Study of performance, combustion and emission characteristics of a turbocharged diesel engine with biodiesels available in North eastern region of India, funded by DST, Govt. of India

 

 

 

A. Refereed Journal Papers (International)

1. T.K. Gogoi, P. Sarmah, D. Deb Nath, “Energy and exergy based performance analyses of a solid oxide fuel cell integrated combined cycle power plant” Energy Conversion and Management 86 (2014) 507–5192.

2. T.K. Gogoi, K. Talukdar, “Thermodynamic analysis of a combined reheat regenerative thermal power plant and water- LiBr vapour absorption refrigeration system” Energy Conversion and Management 78 (2014) 595–610

3. T.K. Gogoi, K. Talukdar, “Exergy based parametric analysis of a combined reheat regenerativethermal power plant and water–LiBr vapor absorption refrigeration system” Energy Conversion and Management 83 (2014) 119–132

4. T. K. Gogoi, “A Combined Cycle Plant with air and fuel recuperator for Captive power application, Part 1: Performance analysis and comparison with non-recuperated and gas turbine cycle with air recuperator”, Energy Conversion and Management 79 (2014) 771–777

5. T. K. Gogoi, R. Das, “A Combined Cycle Plant with air and fuel recuperator for Captive power application, Part 2: Inverse analysis and parameter estimation”, Energy Conversion and Management 79 (2014) 778–789

6. T. K. Gogoi, R. Das, “Inverse analysis of an internal reforming solid oxide fuel cell system using simplex search method.” Applied Mathematical Modelling 37 (2013) 6994–7015

7. T.K. Gogoi, “Exergy Analysis of A Diesel Engine Operated with Koroch Seed Oil Methyl Ester and Its Diesel Fuel Blends”, Int. J. of Exergy, 12 (2013) 183–204

8. T.K.Gogoi, D.C.Baruah, “A Cycle Simulation Model for Predicting Performance of a Diesel Engine Fuelled by Diesel and Bio-diesel Blends”, Energy 35 (2010) pp. 1317–1323

9. T.K. Gogoi, D.C. Baruah, “The use of Koroch seed oil methyl ester blends as fuel in a diesel engine”, Applied Energy, 88 (2011) pp. 2713-2725

10. T.K. Gogoi, D.C. Baruah, “Performance and energy analyses of a diesel engine fuelled with Koroch seed oil methyl ester and its diesel fuel blends”, Int. J. Energy Technology and Policy, Vol. 7, Nos. 5/6, 2011

B. Refereed Conference Papers (International)

1. T.K. Gogoi, S. Sarma and S. Borthakur, Simulation of a hybrid solid oxide fule cell-gas turbine system, International Conference on Energy Resources Technologies for Sustainable Development (ICERTSD-2013), held in BESU from 7-9th February,2013 and subsequently published in International Journal of Emerging Technology and Advanced Engineering (An ISO 9001:2008 certified Int. Journal, ISSN 2250-2459),Volume 3, Special Issue 3 pages 250-258

2. M. Pandey and T.K. Gogoi, Energy and exergy analysis of reheat regenerative vapour power cycle , International Conference on Energy Resources Technologies for Sustainable Development (ICERTSD-2013), held in BESU from 7-9th February,2013 and subsequently published in International Journal of Emerging Technology and Advanced Engineering (An ISO 9001:2008 certified Int. Journal, ISSN 2250-2459),Volume 3, Special Issue 3 pages pages 427-434

3 T.K. Gogoi, N.K Sarma, A.A. Choudhury and T. Talukdar, First law analysis of Diesel engine performance using diesel and biodiesel fuel,  International Conference on Energy Resources Technologies for Sustainable Development (ICERTSD-2013), held in BESU from 7-9th February,2013 and subsequently published in International Journal of Emerging Technology and Advanced Engineering (An ISO 9001:2008 certified Int. Journal, ISSN 2250-2459),Volume 3, Special Issue 3 pages 421-426

4. T.K. Gogoi, A.K.Sarma, P.S. Misra, Syed T. Haque, Combustion analysis of jatropha methyl ester and its ethanol and acetone blends in a diesel engine, International Conference on Energy Resources Technologies for Sustainable Development (ICERTSD-2013), held in BESU from 7-9th February,2013 and subsequently published in International Journal of Emerging Technology and Advanced Engineering (An ISO 9001:2008 certified Int. Journal, ISSN 2250-2459),Volume 3, Special Issue 3 pages 51-57

5.  T.K. Gogoi, D.C. Baruah,  “Energetic Performance Analysis of a Diesel Engine Fuelled With Koroch Seed Oil Methyl Ester and Its Diesel Blends” ; in the proceedings of International Conference on Thermal Energy and Environment (INCOTEE), 24-26th March, 2011 held in Kalasalingam University, Tamilnadu, India.

6. T.K. Gogoi, S. Talukdar, D.C. Barauah, “Comparative Analysis of Performance and Combustion of Koroch Seed Oil and Jatropha Methyl Ester blends in a Diesel Engine.”; in the proceedings of World Renewable Energy Congress (WREC) 2011 held in Linkoping, Sweden from 8-13th May, 2011.

C. Refereed Conference Papers (National)

1. T.K. Gogoi, D.C. Baruah, Development of a cycle simulation model for predicting   performance of a Diesel Engine fuelled by diesel and bio-disel blends”.,CAMSCM,2009, NERIST, Nirjuli, AP

2.  T.K. Gogoi, D.C. Baruah, Study of Performance and Combustion in a small DI diesel engine fuelled with biodiesel and its diesel blends;       National Conference on Renewable Energy 2010    (NCRE2010) 23 – 25 March 2010, Tezpur University

 

D. B.Tech. projects Guided

1. Numerical Simulation of a Hybrid Solid Oxide Fuel Cell (SOFC) –Gas turbine(GT) system

2. Study of performance of a reheat regenerative thermal power plant fueled with solid biomass and coal of various compositions: A theoretical study

3. Modeling of Fuel Injection system of a Diesel Engine

4. Numerical Analysis of Lid driven flow in a square cavity at low Reynolds Number.

5. Numerical simulation of heat transfer in thermally and simultaneously developing flows in a circular pipe.

6. Performance and Heat Release Analysis of a diesel engine fuelled with diesel and biodiesel blends.

7. Combustion and performance evaluation of a diesel engine fuelled with biodiesel produced from Koroch seed and Jatropha Curcus Oil.

8. Numerical Solution of One dimensional transient heat conduction equation.

9. Energy and Exergy Analyses of Diesel Engine Processes Using Bio-diesel Blends.

10. Experimental investigation on performance. Combustion and emission characteristics of a single cylinder direct injection diesel engine fuelled with biodiesel

11. Modeling of heating and evaporation of fuel droplets: A numerical analysis

12. Performance and Combustion analysis of Jatropha methyl ester and its ethanol and acetone blends in a diesel engine