Date of Joining: 07/09/12

Contact Information

Department of Mechanical Engineering,
Tezpur University,
Napam, 784028, Sonitpur, Assam, India.

Office: +91-3712-27-5867
email: satadru@tezu.ernet.in

 

Homepage: click here

Vidwan Link: click here

Download Complete CV

Satadru Kashyap

(Assistant Professor)

Qualification:

  • PhD, Tezpur University - 2019
  • MS, University of Alberta, Canada - 2010
  • BE, National Institute of Technology Karnataka (NITK), Surathkal - 2005

Area of Specialization/Research:

  • Manufacturing
  • Composite Materials
  • Materials Science

Research Publications (selected five):

  • Kashyap, S., Nath D. and Das, D. Characterization, weathering and modeling of natural fibre based composites. Materials Today: Proceedings, 26(2), pp. 963-971, 2020. DOI: https://doi.org/10.1016/j.matpr.2020.01.155.
  • Kashyap, S., Banik T. and Reddy, T.S. Comparative study and modelling of machinability characteristics of single and double tempered AISI H13 steel during hard part finish turning using brazed tungsten carbide tip. Materials Today: Proceedings, 26(2), pp. 1430-1438, 2020. DOI: https://doi.org/10.1016/j.matpr.2020.02.296.
  • Kashyap, S. and Datta,. Evaluation of Stearic Acid modified Industrial Lime Sludge Waste as filler in High Density Polyethylene composites. Journal of Polymer Engineering, 38(4), pp. 333-341, 2018. DOI: https://doi.org/10.1515/polyeng-2017-0138.
  • Kashyap, S. and Datta,. Lime sludge waste HDPE composites: a study of their mechanical, thermal and morphological properties. Journal of Thermoplastic Composite Materials, 31(10), pp. 1323-1340, 2018. DOI: https://doi.org/10.1177/0892705717738289.
  • Kashyap, S., Islam, J. and Datta, D. A study of industrial lime sludge waste as filler in hybrid polymeric composites. Materials Science and Engineering, 377(1), pp. 012-019, 2018. DOI: https://doi.org/10.1088/1757-899X/377/1/012019.

Papers in Conference Proceedings (selected five):

  • Reddy T.S., Banik T., Velagala R., and Kashyap S. A study and modeling of cutting forces in dry turning of heat treated AISI H13 tool steel with brazed tungsten carbide tip. In: 3rd International Conference on Advances in Materials and Manufacturing Applications. Editors: Singh, S. GRIET-ICMPC, 2018.
  • Reddy T.S., Banik T., Velagala R., and Kashyap S. A Study of Machinability Characteristics of Heat Treated AISI H13 Steel. In: Advances in Civil and Infrastructure Engineering (ACIE-2018). Civil Engineering Department, Tezpur University, 2018.
  • Kashyap,S., Islam, J. and Datta D. A study of Industrial Lime Sludge Waste as filler in hybrid polymeric composites. In: 1st International Conference on Mechanical Materials and Renewable Energy (ICMMRE). Sikkim Manipal Institute of Technology (SMIT), Majitar, Sikkim, 2017.
  • Kashyap, S. and Islam, J. A study on flexural properties of lime sludge filled coir fibre reinforced epoxy composites. In: National Conference on Advances in Science Engineering and Technology (ASET). GIMT, Tezpur, 2017.
  • Islam, J. and Kashyap, S. Study on the tensile properties of Lime Sludge Filled Coir Fibre Reinforced Epoxy Composites. In: National Conference on Sustainable Mechanical Engineering and Beyond (SMETB-17). Editors: Gogoi, T.K., Dutta, P.P., and Kamal, S.M. Mechanical Engineering Department, Tezpur University, 2017, pp. 133-138.

Other Publications

    Book Chapter

  • Hhrishikesh Pathak, Sanghmitra Das, Rakesh Doley, Satadru kashyap Optimization of Cutting Parameters for AISI H13 Tool Steel by Taguchi Method and Artificial Neural Network. In: Deep Learning and Neural Networks:Concepts, Methodolgies, Tools and Applications. Editors: Vinay Kr Jain, Shishir Kumar, Prabhat kumar Mahanti IGI Global, 2020, pp. 531-551.
  • Satadru Kashyap, Dipyaman Gogoi Study of industrial lime sludge waste filled coir-jute reinforced polyester hybrid composites. In: Spectrum Vol. 1. Editors: Rhituraj Saikia, Gwendolyn Midlo Hall, Pratisha Kumari, Manickam Mathiyazhagan Eudoxia Research Centre, India, 2020, pp. 22-37.
  • Satadru Kashyap, Dillip Datta Development of Various Industrial Lime Sludge Waste-Filled Hybrid Polymeric Composites for Environmental Sustainability. In: Futuristic Composites: Behaviour Characterizaton and Manufacturing. Editors: S S Sidhu, P S Bains, R Zitoune, M Yazdani Springer, 2018, pp. 197-221.

Research Projects

  • "Multi-Crop Residue Processing Technology Package for Production of Fuel and Fertilizer"
    • PI: Prof Debendra Ch. Baruah
    • co-PI: Dr. Satadru Kashyap, Dr. Nabin Sarmah, Dr. Eeshan Kalita, Dr. Durlav Sonowal
    • Duration: 3 years
    • Funding Agency: SERB-DST (IMPRINT)
    • Project Amount (Rs): 14078592
    • Status: Ongoing
  • Utilization of the Calcium Carbonate (CaCO3) obtained from Lime Sludge waste of Indian Paper Industry in the fabrication and study of mechanical properties of calcium carbonate based Lime Sludge filled Polyethylene composites and Optimization of their manufacturing parameters
    • PI: Dr. Satadru Kashyap
    • Duration: 3 years
    • Funding Agency: SERB-DST
    • Project Amount (Rs): 2430000
    • Status: Completed

Patents/Consultancy/Innovations, etc.

Awards/Honours, etc.

  • Young Scientist Award, 2013, SERB-DST.
  • Best Paper Award, 2017, ICMMRE 2017, SMIT (Sikkim).
  • Best Paper Award, 2013, International Conference in Advances in Science and Technology, Lonavala, Pune (India).
  • 2nd Prize, Ceramographic Competition, Optical Microscopy Category , 2010, ACERS at MS&T, Houston, Texas, U.S.A.
  • Mary Louise Imrie Graduate Student Award , 2010, Faculty of Graduate Studies and Research, University of Alberta.
  • Postgraduate Scholarship , 2008-2010, Faculty of Graduate Studies and Research, University of Alberta.