Date of Joining: 02-08-2010

Contact Information

Department of Mechanical Engineering,
Tezpur University,
Napam, 784028, Sonitpur, Assam, India.

Office: +91-3712-27-5862
email: sanjibb@tezu.ernet.in

 

Homepage: click here

Vidwan Link: click here

Download Complete CV

Sanjib Banerjee

(Associate Professor)

Qualification:

  • PhD, (Materials and Manufacturing), IIT Guwahati, 2011
  • MTech, (Materials Engineering), IIEST Shibpur, 2005
  • BE, (Mechanical Engineering), Bangalore University, 2001

Area of Specialization/Research:

Research Publications (selected five):

  • Gogoi, S., Banerjee, S., Bhadra, R., Mondal, A. K., and Roy, P. Structure-Property Correlation for Friction Stir Welded Joints of 2219Al Alloys Microalloyed with Cd.. Materials Chemistry and Physics (MatChemPhys), 329, pp. 130051, 2025.
  • Gogoi, S., Siddiqui, H. R., Banerjee, S., Kashyap, S., Kirtania, S., and Bhadra, R. Correlating Fractography with Mechanical Properties of Microalloyed 2219Al Alloys under Different Thermo-Mechanical Conditions. Advances in Materials and Processing Technologies (AMPT), 10(4), pp. 2918, 2023.
  • Gogoi, S., Banerjee, S., and Bhowmick, S. Modelling Precipitation Kinetics and Investigating Age-Hardening Behaviour of 2219Al Alloys Microalloyed with Cd. Journal of Thermal Analysis and Calorimetry (JTAC), 147, pp. 12437, 2022.
  • Banerjee, S., Robi, P. S., Srinivasan, A., and Lakavath, P. K. High Temperature Deformation Behavior of Al-Cu-Mg Alloys Micro Alloyed with Sn. Material Science and Engineering A, 527, pp. 2498, 2010.
  • Banerjee, S., Robi, P. S., Srinivasan, A., and Lakavath, P. K. Effect of Trace Additions of Sn on Microstructure and Mechanical Properties of Al-Cu-Mg Alloys. Materials and Design, 31, pp. 4007, 2010.

Papers in Conference Proceedings (selected five):

  • Banerjee, S., and Gogoi, S. Fractographic Analysis of Microalloyed 2219Al Alloys under Different Processing Conditions. In: 12th International Conference on Material Processing and Characterization (ICMPC-2021), NITTTR, Chandigarh. 2021.
  • Banerjee, S., Gogoi, S., Saha, B., and Rajkonwar, U. Modeling of Flow Curve for 2219Al Alloys Microalloyed with Cd. In: International Conference on Advancements in Mechanical Engineering (ICAME-2020), Kolkata. 2020.
  • Banerjee, S., Bayan, G. J., Roy, A., Sarkar, S., and Gogoi, D. Influence of Rolling and Age-Hardening on the Hardness and Impact Properties of Microalloyed 2219 Al Alloys. In: 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2014), IIT Guwahati. 2014.
  • Robi, P. S., Banerjee, S., and Srinivasan, A. Deformation Mechanism Maps for Al-Cu-Mg Alloys Micro-Alloyed with Tin. In: 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM-XX), Hong Kong, China. 2011.
  • Banerjee, S., Robi, P. S., and Srinivasan, A. Study on Micro Structural and Mechanical Properties of Al-Cu-Mg Alloys Micro Alloyed with Sn in Cast, Annealed and Rolled Conditions. In: 63rd Annual Technical Meeting of The Indian Institute of Metals, (NMD-ATM-2009), Kolkata. 2009.

Other Publications

    Book Chapter

  • Kashyap, S., Kirtania, S., and Banerjee, S. Smart Biomaterials for Thermal Regulation in Biomedical Applications.. In: Engineering Materials for Efficient Energy Storage and Conversion. Editors: Shukla, A. K. et al. IGI Global, 2024, pp. 377.
  • Banerjee, S., and Gogoi, S. Optimizing the Peak-Ageing Conditions for Microalloyed 2219Al Alloys. In: Recent Advances in Materials Processing and Characterization, Lecture Notes in Mechanical Engineering (LNME). Editors: Raju, R. R. et al. Springer, 2022, pp. 45.
  • Gogoi, S., Kumar, D., Banerjee, S., Kirtania, S., and Kashyap, S. Tribological Characterization of Microalloyed Al-Cu Alloys by Artificial Neural Network Modelling. In: Recent Advances in Materials Processing and Characterization, Lecture Notes in Mechanical Engineering (LNME). Editors: Raju, R. R. et al. Springer, 2022, pp. 83.
  • Gogoi, S., Nath, B., Konwar, B., Bora, A., Banerjee, S., Kashyap, S., and Kirtania, S. Investigating Machinability of Microalloyed Al-Cu Alloys by Simulation of Cutting Force. In: Recent Advances in Materials Processing and Characterization, Lecture Notes in Mechanical Engineering (LNME). Editors: Raju, R. R. et al. Springer, 2022, pp. 275.
  • Gogoi, S., Baruah, R., Ahmed, M., Banerjee, S., Kirtania, S., and Kashyap, S. Design and Fabrication of Impression Creep Testing Set-up and Experimental Validation with 2219Al Alloys. In: Recent Advances in Materials Processing and Characterization, Lecture Notes in Mechanical Engineering (LNME). Editors: Raju, R. R. et al. Springer, 2022, pp. 93.
  • Borah, P.P., Kashyap, S., Kirtania, S., and Banerjee, S. Modeling of Structural Responses for Pineapple Leaf Fibre Epoxy Composite. In: Recent Advances in Materials Processing and Characterization, Lecture Notes in Mechanical Engineering (LNME). Editors: Raju, R. R. et al. Springer, 2022, pp. 199.
  • Bordoloi, M.M., Kirtania, S., Kashyap, S., and Banerjee, S. Investigation of Mechanical Properties of Carbon Fiber/Graphene Nanoplatelet/Epoxy Hybrid Nanocomposites. In: Recent Advances in Materials Processing and Characterization, Lecture Notes in Mechanical Engineering (LNME). Editors: Raju, R. R. et al. Springer, 2022, pp. 211.
  • Das, B.M., Kirtania, S., Banerjee, S., and Kashyap, S. Finite Element Analysis of Natural Hemp Fiber-Based Composite for Semi-Elliptical Multi Leaf Spring. In: Recent Advances in Materials Processing and Characterization, Lecture Notes in Mechanical Engineering (LNME). Editors: Raju, R. R. et al. Springer, 2022, pp. 225.
  • Banerjee, S., Bhadra, R., Gogoi, S., and Dutta, R. S. Investigating Weldability in Microalloyed Al Alloys. In: Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering (LNME). Editors: Biswal, B. B. et al. Springer, 2020, pp. 271.

Research Projects

  • Development and Characterization of Thermo-Mechanically Treated Microalloyed 6061Al Alloys to Enhance Performance of Underwater Ship Hull
    • co-PI: Sanjib Banerjee
    • Duration: 2024-26
    • Funding Agency: IIT Guwahati Technology Innovation and Development Foundation
    • Project Amount (Rs): 20 lac
    • Status: Ongoing
  • Experimental Characterization and Thermo-Mechanical Analysis of Underwater Friction Stir Welded Al Alloys for Submerged Marine Applications
    • co-PI: Sanjib Banerjee
    • Duration: 2024-26
    • Funding Agency: IIT Guwahati Technology Innovation and Development Foundation
    • Project Amount (Rs): 13 lac
    • Status: Ongoing
  • Processing and Mechanical Property Evaluation of Microalloyed 2219 Al Alloys
    • PI: Sanjib Banerjee
    • Duration: 2013-17
    • Funding Agency: DST-SERB
    • Project Amount (Rs): 18.4 lac
    • Status: Completed

Patents/Consultancy/Innovations, etc.

Awards/Honours, etc.

  • Best Oral Presentation Award, 2022, 2nd International Conference on Current Scenario in Chemical Sciences (CSCS-2022), Jalgaon.
  • Best Paper Award, 2021, 12th International Conference on Material Processing and Characterization (ICMPC-2021), NITTTR Chandigarh.
  • Best Paper Award, 2020, International Conference on Advancements in Mechanical Engineering (ICAME-2020), Kolkata.
  • Second Best Paper Award, 2014, International Conference on Advances in Mechanical Sciences (ICAMS-2014), Hyderabad.
  • Fast Track Research Grant and Young Scientist Award, 2013, DST-SERB .
  • Start-Up Grant Fellowship, 2013, UGC.
  • All India Third, 2005, All India Science, Technology and Engineering Students Academic Meet 2005 by Forum of Scientists, Engineers and Technologists (FOSET), IIEST Shibpur.