Screen Reader |
PERSONAL PROFILE |
||||||||||||||||||||
|
||||||||||||||||||||
Designation:
Assistant Professor |
||||||||||||||||||||
Department:
Mechanical Engineering |
||||||||||||||||||||
Address:
|
||||||||||||||||||||
Phone:
+
91 (3712)-27-5862 |
||||||||||||||||||||
E-mail:
sanjibb@tezu.ernet.in |
||||||||||||||||||||
SANJIB BANERJEE |
website: www.tezu.ernet.in |
|||||||||||||||||||
Research Interests |
||||||||||||||||||||
Steels and Aluminum
Alloys Advanced Materials and
Manufacturing Processes Melting and Casting
Techniques Metal Working and Metal Cutting Metallography Microalloying and
Strengthening Mechanical
Characterization and Materials Testing |
Creep, Fatigue, Fracture and Failure analysis Differential Scanning Calorimetry (DSC) XRD Technique High Temperature Deformation Behavior Deformation Processing Maps and Instability Analysis Artificial Neural Networks (ANN), Constitutive Models,
Regression Analysis, and other applied computational models |
|||||||||||||||||||
|
||||||||||||||||||||
Education |
||||||||||||||||||||
Degree |
Year |
Institute / University |
Specialization |
% of marks/ CGPA |
||||||||||||||||
PhD |
2011 |
Department of Mechanical Engineering, Indian Institute of Technology (IIT) Guwahati, India |
Materials and
Manufacturing |
- |
||||||||||||||||
M Tech |
2005 |
Bengal Engineering and
Science University (BESU), Presently Indian Institute of Engineering Science and
Technology (IIEST), Shibpur, India |
Materials Engineering |
77.7 % |
||||||||||||||||
B E |
2001 |
Bangalore University, India |
Mechanical Engineering |
84 % |
||||||||||||||||
PhD Thesis Title: Mechanical Properties and High Temperature Deformation
Behavior of Al–Cu–Mg Alloys Microalloyed with Tin. |
||||||||||||||||||||
M.Tech Thesis Title: Influence of Martensite Morphology and Volume Fraction on the
Mechanical Properties of Dual Phase Steels. |
||||||||||||||||||||
Final Year B.Tech
Project (BTP) Title: Condition Based Maintenance System (CBMS) & it’s
Application on the Flushing Liquor Pump. |
||||||||||||||||||||
Professional Experience (In reverse chronological order) |
||||||||||||||||||||
Organization |
Duration |
Designation |
Nature
of Job |
|||||||||||||||||
Tezpur University |
August 2010 to Present |
Asst. Professor |
Teaching
of U.G. and P.G. courses in Mechanical Engineering (Specialization of
Materials and Manufacturing), Supervising Students for B. Tech. Projects and
M.Tech. thesis, Developing Laboratories, Research projects and various
administrative activities |
|||||||||||||||||
Department of Mechanical
Engineering, Indian Institute of Technology (IIT) Guwahati |
April 2010 to June 2010 |
Associate Project
Engineer (Ad Hoc) |
Pressure Tube Creep Correlation Development |
|||||||||||||||||
Exide Industries Ltd. (R & D Centre) |
April 2005 to June 2005 |
Project Trainee (Product
Development – Automotive) |
The project comprised of designing and modification of various
aspects of lead acid batteries for automotive applications |
|||||||||||||||||
Tractors India Ltd (TIL Ltd.) |
July 2002 to September
2003 |
Design and Fabrication
Engineer |
Worked as Design / Fabrication Engineer and was associated with
designing and fabricating structural units related with the manufacturing of
cranes |
|||||||||||||||||
Teaching Experience |
||||||||||||||||||||
Courses Taught at Post Graduate
(PG) Level: Advanced Engineering Materials Failure Analysis of Materials Courses
Taught at Under Graduate (UG) Level: Material Science Manufacturing Technology
I Manufacturing Technology
II Machine Tool and
Machining Design and Approval of Courses: Advanced Engineering Materials (PG) Fatigue, Fracture and Failure (PG) Machine Tool and Machining (UG) |
Development
of Lab.: Advanced
Manufacturing Lab. (Assistance, IIT Guwahati) Material Science Lab.
(Ongoing, Tezpur University) Laboratory
Assistant (IIT Guwahati):
Material Science Lab. Strength of Materials
Lab. Advanced
Manufacturing Lab. B.Tech. Projects (BTP) Supervised: 06 Completed) 0 (Ongoing) M.Tech. Thesis (MTP) Supervised: 1 (Ongoing) |
|||||||||||||||||||
Thesis / Projects Supervised and Ongoing |
||||||||||||||||||||
M.Tech. thesis
supervised:
1. Investigating the Impression
Creep Behaviour of Microalloyed 2219Al Alloy (Ongoing). |
||||||||||||||||||||
B.Tech. projects supervised:
1.
An Ann
Modelling of Flow Stress as A Function of Deforming Conditions and Microalloying
Composition of A 2xxx Series Al Alloy Used For High Specific Strength
Applications. 2. Constitutive
Modelling to Predict the Flow Stress as A Function of Strain. 3. Investigation of Effect of Cutting Conditions on Cutting Forces Through
an Experimental Study and Computational Modelling. 4. An Experimental Study and
Computational Modelling of Surface Roughness as A Function of Cutting
Conditions During Orthogonal Turning of Mild Steel. 5. Investigating the Influence of Rolling and
Age-Hardening Treatment on the Hardness Properties and Cutting Force Based
Machinability of Microalloyed 2219 Al Alloys. 6. An Experimental
Investigation of the Influence of Microalloying on the Impact Properties and Surface
Roughness Based Machinability of Rolled Al-Cu-Mg Alloys. |
||||||||||||||||||||
Sponsored Research Projects |
||||||||||||||||||||
Project Title: Processing and Mechanical
Property Evaluation of Microalloyed 2219 Al Alloys Amount: 18.38 Lakhs Duration: 2013-16 Sponsor: Scientific and
Engineering Research Board, Department of Science and Technology (DST-SERB) |
||||||||||||||||||||
International Journal Publications |
||||||||||||||||||||
1. Sanjib Banerjee, Angshuman Deka,
Gitartha Dev Sarmah and Nitish Bhardwaj, Artificial
Neural Network Modeling of the Effect of Cutting Conditions on Cutting Force Components
during Orthogonal Turning, International Journal of Current
Engineering and Technology (GIF
2.552) Sp. Issue -2 (Feb. 2014) 127-130. 3.
P.S. Robi, Sanjib Banerjee and A. Srinivasan, Deformation Mechanism Maps for
Al-Cu-Mg Alloys Micro-Alloyed with Tin, Advanced Materials Research, 410
(2012) 283-286. 4. Sanjib Banerjee, P.S. Robi and A. Srinivasan, Prediction of Hot Deformation Behavior of Al–5.9%Cu–0.5%Mg Alloys with Trace Additions of Sn, Journal of Material Science (IF 1.855), 47(2) (2012) 929-948. 5.
Sanjib
Banerjee, P.S. Robi and A.
Srinivasan, Calorimetric Study of Precipitation Kinetics of Al–Cu–Mg and
Al–Cu–Mg–0.06 wt.% Sn Alloys, Metals and Materials International (IF
1.195), 16 (4) (2010) 523-531. 6. Sanjib
Banerjee, P.S. Robi, A.
Srinivasan and Praveen Kumar Lakavath, Effect of Trace Additions of Sn on
Microstructure and Mechanical Properties of Al–Cu–Mg Alloys, Materials
and Design (IF 1.694), 31 (2010) 4007-4015. 7. Sanjib
Banerjee, P.S. Robi, A.
Srinivasan and Lakavath Praveen Kumar, High Temperature Deformation Behavior
of Al–Cu–Mg Alloys Micro Alloyed with Sn, Material Science and
Engineering A (IF 2.090), 527 (2010) 2498-2503. 8.
S. Banerjee, D. Das and P.P.
Chattopadhyay, Correlation of Microstructure with Mechanical Properties of
High-Martensite Dual Phase Steel, International Journal of Materials Science,
4(4) (2009) 419-432. |
||||||||||||||||||||
Conference Presentations / Proceedings |
||||||||||||||||||||
International Conferences: |
||||||||||||||||||||
|
||||||||||||||||||||
National Conferences: |
||||||||||||||||||||
1. Sanjib
Banerjee,
Angshuman Deka, Gitartha Dev Sarmah
and Nitish Bhardwaj, A
Computational Modeling of Surface Roughness as a function of the Cutting
Conditions during Orthogonal Turning, National Conference on
Manufacturing: Vision for Future (MVF 2013), October 12-13 (2013) IIT
Guwahati, India, 133-138. |
||||||||||||||||||||
Workshops / Training / Seminars /
Conferences / Symposia Attended |
||||||||||||||||||||
1. Attended and Presented research
paper in seven (7) nos. of Conferences (International and National). 2. Two-Week Iste Workshop on ‘Engineering Mechanics’ under
the National Mission on Education through ICT (MHRD,
Govt. of India) by ‘Indian Institute of Technology (IIT) Bombay’, 26 Nov - 06
Dec, 2013. 3. ‘Saksham – IT Champion
Training program’ by ‘Microsoft’, Tezpur University, 19 - 28 April, 2013. 4. Workshop on
‘Intellectual Property Rights (IPR)’ by ‘MHRD IPR Chair, Tezpur University’,
8 Aug, 2013. 5.
Talk on
‘Fundamentals on Scanning Electron Microscope (SEM) and Sample Preparation’
by ‘Department of Physics, Tezpur University’, 21 Aug, 2013. 6. ‘TIL Technical Training’
by ‘TIL Limited’, 26 Aug - 05 Nov, 2002. 7. ‘Vacational Training’ by ‘Bokaro Steel
Plant (BSP), Steel Authority of India Limited (SAIL)’, 13 - 30 Nov, 2000. |
||||||||||||||||||||
Administrative Experiences &
Professional Activities |
||||||||||||||||||||
1. Acted as Reviewer of International
Journals:
Metallurgical and Materials Transactions A (Springer), Journal of Material science
(Springer), Journal of Alloys and Compounds (Elsevier), International Journal
of Materials and Product technology (Inder Science). 2.
A member of the organizing committee
of 18th National and 7th ISHMT – ASME conference held
on January 2006, at Indian Institute of Technology Guwahati. |
||||||||||||||||||||
Awards And Grants |
||||||||||||||||||||
1.
Received SERB Start-Up Research Grant (Young
Scientist) for 2013-2016 in the discipline of
Engineering Sciences. |
||||||||||||||||||||
2. Research paper entitled ‘Artificial Neural Network Modeling
of the Effect of Cutting Conditions on Cutting Force Components during
Orthogonal Turning’ received ‘Second Best Paper Award’ in the ‘1st International
Conference on Advances in Mechanical Sciences (ICAMS 2014)’, January 9-11 (2014) Hyderabad, India. |
||||||||||||||||||||
3. Declared ‘All India 3rd’ for presentation
of technical paper titled ‘Influence of Martensite Morphology and Volume
Fraction on the Tensile Properties of Dual Phase Steels’ at the ‘All India
Science, Technology and Engineering Students Academic Meet 2005’ organized by
‘Forum of Scientists, Engineers and Technologists (FOSET)’ at Bengal
Engineering and Science University on 20th January, 2005. |
||||||||||||||||||||
Department of Mechanical Engineering, School of Engineering, Tezpur University, Napaam 784028, Tezpur, Assam, India |
||||||||||||||||||||